Summary of DocuPrint 4635

  • Page 1

    Xerox xerox 4635 laser printing system master index april 1995 721p83110

  • Page 2

    Xerox corporation 701 s. Aviation boulevard el segundo, ca 90245 © 1994, 1995 by xerox corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including wi...

  • Page 3: Xerox 4635 Lps

    Xerox 4635 lps master index symbols .Bcp command, or 5-4 to 5-5 .Chain, command, or 5-6 .Delay command, or 5-7 .Exit command, or 5-7 .Home command, or 5-7 .Pause command, or 5-7 .Wait command, or 5-8 numerals .25-inch cartridge tape drive cleaning, og 11-20 components, og 7-21 features, ip 1-2 to 1-...

  • Page 4

    Master index clear/create, pc 2-6 complete display, pc 2-3 format, pc 2-7 print, pc 2-4 to 2-5 save, pc 2-5 to 2-6 search, pc 2-7 user report, pc 2-9 to 2-10 accounts data, copying, or 3-14 to 3-17 establishing, or 3-14 to 3-15 tape format, or 3-15 to 3-17 acct command accounting data, pdl 6-9, 6-12...

  • Page 5

    Master index bar code device, ip 2-4, og 1-15 mode echo, og 14-3 reader adjusting, og 14-4 to 14-6 description, or intro-7, pc 7-8 to 7-9, pr 1-4 state, setting, or 1-20 to 1-21 status icon, pc 1-10 turning on/off, og 14-1 to 14-2 bar code alignment mode, or 1-21 bar command, lps, or 1-20 to 1-21 ba...

  • Page 6

    Master index cable enter/exit locations, ip 3-11 lengths, ip 3-10 to 3-11 card-image format files, or 7-35, pdl 4-48, 8-48 to 8-50 processing, or 7-38 carriage control commands, pdl 4-40 to 4-41 cartridge tape description, ip 3-25 drives, naming, or intro-6 to intro-7 files, manipulating, or 2-24 to...

  • Page 7

    Master index combined remote interface board, see crib command files creating, pc 5-5 command summary, or d-1 description, or 5-1 documenting, or 5-5 logical processing, or 5-8 to 5-10 messages, or 5-5 running, pc 5-4 samples, or 5-10 to 5-11 summary, commands, or 5-6 verifying type, or 5-4 command ...

  • Page 8

    Master index constant parameter block command, pdl 4-3 criteria command, pdl 7-4 record command, pdl 4-14 table command, pdl 7-35 consumable supplies, ip 5-6 to 5-10, og b-1 to b-4 container size, pc 6-18 to 6-19 continue button, og 1-10, 2-8, 5-17, 12-25, pc 1-9, pr 3-7 input/output task, og 5-17, ...

  • Page 9

    Master index delivery access requirements, ip 3-12 to 3-14 turning radius, ip 3-12 to 3-14 see also installation density parameter, output command, pdl 6-50 department entry, or 3-4 dept parameter, djde, pdl 8-28 description commands, fc 3-12 to 3-34 descriptor page, sample, or 11-5 desktop autoscro...

  • Page 10

    Master index modify, pdl 8-36 number, pdl 8-36 to 8-37 otext, pdl 8-37 overprint, pdl 8-37 to 8-38 points to note, pdl 8-45 to 8-47 pmode, pdl 8-38 rform, pdl 8-38 rtext, pdl 8-39 save, pdl 8-39 sefmap, pdl 8-39 to 8-40 separators, pdl 9-40 sf1function, pdl 8-41 sf2function, pdl 8-41 shift, pdl 8-41...

  • Page 11

    Master index energy saver task, og 4-12 to 4-13, pc 8-7 enetmaxcons command, hip, or 8-20 enhanced advanced image processor (eaipx), or 7-2 enhanced graphics ink and font memory (egifm), ip 2-3 enhanced graphics, ink, font memory (egifm), or 7-2 enhanced page buffer & iot interface (epbix), or 7-2 e...

  • Page 12

    Master index compile, pc 5-3 to 5-4, pr 4-4 description, fc 1-1 messages, fc b-1 to b-2 resident language, pr 1-2 to 1-3, 2-6 features, pr 1-8 to 1-11 fedit command, font editor, or 6-4 to 6-6 feed command, lps, or 10-22 to 10-24 feed edge, or 10-28 modes, pr 5-23 feed mode, pc 6-7 to 6-8 feed param...

  • Page 13

    Master index fmt6, fc 2-8 to 2-9 fmtn option, fc 2-4 font center, ip 3-23 to 3-24, 5-3 font command, fc 3-12 font editor command files, or 5-4 command summary, or c-1 description, or 6-1 to 6-2, pc 5-6 messages, or 6-4 summary, commands, or 6-3 task, or 7-4, pr 4-3 fontindex parameter djde, pdl 8-30...

  • Page 14

    Master index online formats batch mode, or 9-5, pdl 9-5 document/page interleaved, or 9-4 to 9-5, pdl 9-4 to 9-5 noninterleaved, or 9-4, pdl 9-4 pdl command options, pdl 9-6 options, or 9-7 statement, or 9-8 performance, or 9-16, pdl 9-7 processing modes batch, or 9-2, pdl 9-3 block, or 9-2, pdl 9-2...

  • Page 15

    Master index hip start, or 8-14 to 8-15 hip stop, or 8-16 placing online, og 8-5 print job starting, og 8-6 to 8-7 stopping, og 8-8 send, pc 6-31 taking offline, og 8-6 task, pr 2-2, 4-4 window, og 8-2, pc 6-29 to 6-30 xns host hip end, or 8-7 hip offline, or 8-7 hjobno parameter, banner command, pd...

  • Page 16

    Master index sample, pdl 4-7 zero parameter, pdl 4-5 code command assign parameter, pdl 4-7 to 4-8 default parameter, pdl 4-8 description, pdl 4-7 examples, pdl 4-8 parameters, summary, pdl 4-7 point to note, pdl 4-8 description, pdl 1-5, 1-7 pcc command adv parameter, pdl 4-9 assign parameter, pdl ...

  • Page 17

    Master index printer, or 8-44 rewind, or 8-45 sample, or 8-45 substitution, or 8-45 unload, or 8-45 volinit, or 8-46 image scaling, or 8-35 to 8-37 ipfnts basic structure, or 8-54 description, or 8-48 to 8-50 code, or 8-52 default, or 8-51 font sets, or 8-48 fonts, or 8-50 global, or 8-51 ipfnts, or...

  • Page 18

    Master index jsl application type, pdl 3-3 compiling, pdl 3-13 to 3-14 creating, pdl 3-1 to 3-26, pr 2-6 to 2-8 description, pdl 1-6, 2-1, 2-9 hints/tips, pdl 3-6 to 3-7 input data, pdl 3-2 to 3-3 output specifications, pdl 3-3 procedure steps, pdl 3-8 to 3-13 structure command levels, pdl 2-10 id l...

  • Page 19

    Master index description, pdl 7-1 raux command description, pdl 7-16 example, pdl 7-17 points to note, pdl 7-16 test parameter, pdl 7-16 rbar command, pdl 7-17 rdelete command description, pdl 7-18 example, pdl 7-19 points to note, pdl 7-19 test parameter, pdl 7-18 to 7-19 rfeed command description,...

  • Page 20

    Master index memory buffer capacity, fc e-1 expanded bitmap, pr 1-4 disk, pr 1-4 fonts, fc 3-21, 3-32 to 3-33, pdl 3-22 graphic, pdl 3-22 options, ip 2-3 reallocation, or 1-24 to 1-25 system resources, pr 2-2 menus accounting, pc 2-1 configuration, sample, sg 3-3 to 3-6 disks, pc 4-1 entries, pc 1-1...

  • Page 21

    Master index o o command, editor, or 4-17 to 4-18 ocs command, lps, or 1-14 description, or 7-4, pdl 1-5 processing, pdl 1-7 to 1-8 octal constants, pdl, pdl 2-7 oemi interface, or 7-2 offline hip, og 8-6 input, print jobs, or 11-11 to 11-14 interface description, ip 2-1 to 2-2 formats, pr 1-4 to 1-...

  • Page 22

    Master index oss contents, new version, sg 1-2 description, pr 4-1 to 4-5 problem utility, or 1-15 program description, sg 1-2 system controller, or 7-2 tape contents, pr 4-1 ostk command, or 10-28 to 10-29 parameter, output command, pdl 6-57 to 6-58 ostlp parameter, volume command, pdl 4-35 otext a...

  • Page 23

    Master index storage, og 3-1 tray size, pc 6-5 types, fc 1-2 paper command, fc 3-4 to 3-6 paper feeding enhancement kit, pr 1-1 paper path holes entry, or 3-6 papersize parameter, output command, pdl 6-58 to 6-59 parameters pdl, pdl 2-4, 3-5 setting lps, or 1-1 to 1-16 print jobs, or 1-21 to 1-32 sy...

  • Page 24

    Master index power cables, ip 3-11 cord configuration, ip 3-20 failure, og 12-28 to 12-29 loss, or 1-4 off, or 1-4 receptacle requirements, ip 3-16 to 3-19 saving mode, or 1-19 power off/on, indicator/switch, og 1-3, pr 3-3 powering off .5-inch cartridge tape drive, og 7-18 to 7-19 lps, og 4-4 to 4-...

  • Page 25

    Master index ucsb parameter, pdl 6-30 to 6-31 vfu parameter, pdl 6-31 message command btext parameter, pdl 6-36 to 6-39 description, pdl 6-34 example, pdl 6-34 itext parameter, pdl 6-35 otext parameter, pdl 6-35 to 6-36 parameters, summary, pdl 6-34 output command bform parameter, pdl 6-47 collate p...

  • Page 26

    Master index start, pc 6-22 to 6-24 transparencies, pc 6-15 to 6-16 tray loading, pc 6-8 size, pc 6-19 units, pc 6-15 printed wire board assemblies, see pwbas printer alarm, og 1-9 cables, ip 3-10 to 3-11 carriage control channels, pdl 6-88 clearance, ip 3-7 to 3-10 communication link, or 1-6 to 1-7...

  • Page 27

    Master index raster output scanner (ros), pr 5-23 rasterization messages, og 12-28 raux command description, pdl 7-16 example, pdl 7-17 points to note, pdl 7-16 test parameter, pdl 7-16 rbar command, pdl 7-17 rcu, restricting psc, or 1-8, pc 8-4 to 8-5; seealso restricting access, commands rdelete c...

  • Page 28

    Master index roffset command description, pdl 7-19 example, pdl 7-21 passes parameter, pdl 7-20 points to note, pdl 7-21 test parameter, pdl 7-20 route command cataloged rtext files, pdl 6-83 description, pdl 6-82 example, pdl 6-85 parameters, summary, pdl 6-83 rform parameter, pdl 6-83 to 6-84 rtex...

  • Page 29

    Master index seffnt sefmap parameter, seffnt command, pdl 4-21 sefmap parameter djde, pdl 8-39 to 8-40 seffnt command, pdl 4-21 to 4-22 select feeder trays task, og 9-8 to 9-9 stacker bins task, og 9-10 to 9-11 units task, og 9-19 select command, or 10-30 sending file, hip, pc 6-31 sensors, cleaning...

  • Page 30

    Master index stacker bins, high-capacity description, og 1-7 to 1-8, 3-15 to 3-19, or 10-29 to 10-33, pc 6-5 to 6-6 problems, og 12-26 selecting, og 9-10 to 9-11 seealso high-capacity, stackers stages, sysgen process, sg 3-1 stale date error, pc 8-37 window, or 3-42 stand-alone field engineering sof...

  • Page 31

    Master index controller components, or intro-5 panel, pr 3-3 defaults, fc c-1 to c-3 disks component, pr 3-2 erasing, sg 4-34 formatting, sg 4-33 ids, sg 1-2 storage, pr 2-2 files backing up, or 2-10 to 2-42 manipulating, or 2-1 to 2-5 printing samples, or 11-1 to 11-10 generation, or 1-2 to 1-3, 7-...

  • Page 32

    Master index input source, pr 2-5 magnetic, fc 4-1 multivolume processing, pdl 4-50 packed data formats, pdl 4-49 to 4-50 record formats, pdl 4-50 structure, pdl 4-50 sfs data format, or 3-28 to 3-30 spacing over reports, pc 6-26 structure, concepts, pdl 4-49 tape endfile command, lps, or 2-26 to 2-...

  • Page 33

    Master index unloading .25-inch cartridge tape, og 7-22 .5-inch cartridge tape, og 7-17 to 7-18 floppy disk, og 7-24 open-reel tape, og 7-8 to 7-12 stacker bin, og 3-17 to 3-20 tape, pc 3-2 unpack parameter, volume command, pdl 4-37 update sysgen, pr 4-1 to 4-2 user considerations, pr 5-17 to 5-24 f...

  • Page 34

    Master index w wait command, or 5-8 waste management data, or 3-33 when parameter, rpage command, pdl 7-23, 7-25 wildcards, file id, pc xv windows activating, og 2-19 auxiliary menu, pc 1-14 closing all, pc 1-9 confirmation, pc 1-17 default size, pc 1-9 elements, og 2-10 to 2-12 error, pc 1-18 heade...