1. DL manuals
  2. Xerox
  3. Printer
  4. DocuPrint 96
  5. Message Manual

Xerox DocuPrint 96 Message Manual

Manual is about: Laser Printing System

Summary of DocuPrint 96

  • Page 1

    Xerox docuprint 96/docuprint 96mx laser printing system message guide april 1998 721p85650

  • Page 2

    Xerox corporation 701 s. Aviation boulevard el segundo, ca 90245 ©1998 by xerox corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without l...

  • Page 3

    Xerox docuprint 96/docuprint 96mx lps message guide iii related publications the xerox docuprint 96/docuprint 96mx laser printing system message guide is part of the eight manual reference set for your laser printing system. The entire reference set is listed in the table below. Several other relate...

  • Page 4

    Iv xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 5: Table Of Contents

    Xerox docuprint 96/docuprint 96mx lps message guide v table of contents related publications iii notice iii introduction vii about the reference set vii docuprint 96/docuprint 96mx laser printing system document set vii what the message guide contains x how the message guide is organized xi the conv...

  • Page 6

    Table of contents vi xerox docuprint 96/docuprint 96mx lps message guide 13. System verification error messages 13-1 14. Summary sheet error messages 14-1 appearance error message 14-2 appearance warning messages 14-5 fatal error messages 14-9 informational messages 14-13 master error messages 14-16...

  • Page 7: Introduction

    Xerox docuprint 96/docuprint 96mx lps message guide vii introduction the xerox docuprint 96/docuprint 96mx laser printing systems message guide is one of the eight manuals which make up your docuprint 96/docuprint 96mx laser printing system (lps) reference set. The lps message guide provides an easy...

  • Page 8

    Introduction viii xerox docuprint 96/docuprint 96mx lps message guide xerox docuprint 96/docuprint 96mx lps pdl reference this reference contains the following information: • print description language components and processes • input processing functions • output processing functions • pdl command ...

  • Page 9

    Introduction xerox docuprint 96/docuprint 96mx lps message guide ix xerox docuprint 96/docuprint 96mx lps installation planning guide this reference contains the following information: • lps basic components and options • tasks that must be accomplished before installation • preinstallation requirem...

  • Page 10

    Introduction x xerox docuprint 96/docuprint 96mx lps message guide what the message guide contains the xerox docuprint 96/docuprint 96mx lps message guide is divided into the following chapters: chapter 1: cp (compress command) messages chapter 2: dsr (disk save and restore command) messages chapter...

  • Page 11

    Introduction xerox docuprint 96/docuprint 96mx lps message guide xi • an order card for the customer documentation catalog, which describes other available xerox documentation • a reader comment form. Please take a few minutes to write your comments about the message guide, and any suggestions you m...

  • Page 12

    Introduction xii xerox docuprint 96/docuprint 96mx lps message guide the conventions used in this guide the following conventions are used throughout this guide: • when keyed in, most commands can be shortened to three letters. For example, reset may be entered as res. Commands are shown in capital ...

  • Page 13: Cp (Compress Command)

    Xerox docuprint 96/docuprint 96mx lps message guide 1-1 1. 1 cp (compress command) messages these messages may appear during the process of compressing the system disk. (refer to your docuprint 96/docuprint 96mx lps operations reference chapter on managing lps resources for additional information.) ...

  • Page 14

    Cp (compress command) messages 1-2 xerox docuprint 96/docuprint 96mx lps message guide cp2700 invalid keyin the compress command was entered incorrectly. Action reenter command correctly cp2710 keyins are not allowed at this time compress process has begun. System cannot process any other commands e...

  • Page 15: Dsr (Disk Save and Restore

    Xerox docuprint 96/docuprint 96mx lps message guide 2-1 2. 2 dsr (disk save and restore command) messages these messages may appear during the process of saving all disk files on tape or restoring all files to system disk from tape. (refer to your docuprint 96/docuprint 96mx lps operations reference...

  • Page 16

    Dsr (disk save and restore command) messages 2-2 xerox docuprint 96/docuprint 96mx lps message guide ds8010 tape error xxxx...Dsr aborted the system has encountered a device error from which it was unable to recover after several attempts. Dsr task is aborted. Action 1. Clean the tape drive and retr...

  • Page 17

    Dsr (disk save and restore command) messages xerox docuprint 96/docuprint 96mx lps message guide 2-3 ds9040 system error...Dsr aborted an unspecified hardware error has caused dsr task to abort. Action 1. Retry the dsr task. 2. If the problem continues, contact your systems specialist or xerox custo...

  • Page 18

    Dsr (disk save and restore command) messages 2-4 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 19: Fd (Forms Compilation)

    Xerox docuprint 96/docuprint 96mx lps message guide 3-1 3. 3 fd (forms compilation) messages these messages may appear while forms are being compiled using forms description language (fdl). (refer to your docuprint 96/ docuprint 96mx lps forms creation guide for additional information.) fd0900 opera...

  • Page 20

    Fd (forms compilation) messages 3-2 xerox docuprint 96/docuprint 96mx lps message guide fd2720 key-in too long. Reenter the name or word entered exceeds the permitted number of characters. Action enter a different word within the permitted range. (refer to your docuprint 96/docuprint 96mx lps forms ...

  • Page 21

    Fd (forms compilation) messages xerox docuprint 96/docuprint 96mx lps message guide 3-3 fd9400-fd9540 disk/file error messages fd9400 error in closing the source-input file. Fd9410 error in closing the source-input file. Fd9420 error in closing the listing/summary file. Fd9430 error in opening the s...

  • Page 22

    Fd (forms compilation) messages 3-4 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 23: Messages

    Xerox docuprint 96/docuprint 96mx lps message guide 4-1 4. 4 hip (host interface processor) messages these messages may appear on your system controller display if printer communications have been established through the host interface processor (hip). The hip chapters in your docuprint 96/ docuprin...

  • Page 24

    Hip (host interface processor) messages 4-2 xerox docuprint 96/docuprint 96mx lps message guide hp0085 concatenated job operator display mode is ‘off’ in response to an operator command, hip will not display internal job status while in a concatenated job mode. Action none. Hp0090 job concatenation ...

  • Page 25

    Hip (host interface processor) messages xerox docuprint 96/docuprint 96mx lps message guide 4-3 hp0210 transmission aborted: job id xxxx the hip abort command was entered. The job being sent has been cancelled. Action none. Hp1010 input starting report - jid xx this is displayed while in a concatena...

  • Page 26

    Hip (host interface processor) messages 4-4 xerox docuprint 96/docuprint 96mx lps message guide hp1130 buffer file allocation less than specified the hip buffer has less space than specified in the hip.Cmd file at installation. There may not be enough space to hold the entire job being sent. Action ...

  • Page 27

    Hip (host interface processor) messages xerox docuprint 96/docuprint 96mx lps message guide 4-5 hp1172 log file empty, nothing to print. You have entered the hip show log [prn] command and there are no entries in the log file. Action none. Hp1180 no echo servers on list there are no echo servers on ...

  • Page 28

    Hip (host interface processor) messages 4-6 xerox docuprint 96/docuprint 96mx lps message guide hp1207 offline pending end of current active xns session the hip offline command was entered. The printer will disconnect from ethernet when the current session is terminated. Action none. Hp1210 host onl...

  • Page 29

    Hip (host interface processor) messages xerox docuprint 96/docuprint 96mx lps message guide 4-7 hp1250 transmission complete: job id xxxx the host has completed sending the indicated job to the printer. The job will now begin printing. Action none. Hp1260 interface busy - cannot send file(s) the hip...

  • Page 30

    Hip (host interface processor) messages 4-8 xerox docuprint 96/docuprint 96mx lps message guide hp1299 xpaf communications recovered hip can now receive data via the xpaf communication mode. Data received but not yet written to system disk will be copied from memory (saved at system error restart) a...

  • Page 31

    Hip (host interface processor) messages xerox docuprint 96/docuprint 96mx lps message guide 4-9 hp1420 end of test 3 analysis the system failed diagnostic test 3. Hip has completed analysis of test 3 results and has identified the data line that has failed. This message follows message hp9431 or hp9...

  • Page 32

    Hip (host interface processor) messages 4-10 xerox docuprint 96/docuprint 96mx lps message guide hp2120 insufficient disk space for host buffering fewer than 256 blocks are available for hip buffer space. There is not sufficient space to receive and buffer files. The system cannot go online. Action ...

  • Page 33

    Hip (host interface processor) messages xerox docuprint 96/docuprint 96mx lps message guide 4-11 hp2160 enter ‘hip show log continue’ for more there are more than 20 entries in the log and you must enter hip show log continue to view additional screens. Action none. Hp2165 insufficient disk space fo...

  • Page 34

    Hip (host interface processor) messages 4-12 xerox docuprint 96/docuprint 96mx lps message guide hp2300 command error at: part of command in error the command part indicated was entered incorrectly. Action reenter the command correctly. (refer to the hip chapter in your docuprint 96/docuprint 96mx l...

  • Page 35

    Hip (host interface processor) messages xerox docuprint 96/docuprint 96mx lps message guide 4-13 hp2344 cannot change: job does not exist. The jid specified does not exist in the hip job queue. Action none. Hp2345 cannot change: output file already exists the file specified is already resident on th...

  • Page 36

    Hip (host interface processor) messages 4-14 xerox docuprint 96/docuprint 96mx lps message guide hp2500 change of job xxxx to file file-type failed: unrecoverable i/o error yy. The change command failed due to the error values specified in this message. These error values will be one of the followin...

  • Page 37

    Hip (host interface processor) messages xerox docuprint 96/docuprint 96mx lps message guide 4-15 hp8250 fatal protocol violation detected commands used violate the higher-level software protocols used to communicate between the docuprint 96/docuprint 96mx lps and the host. The host will be advised t...

  • Page 38

    Hip (host interface processor) messages 4-16 xerox docuprint 96/docuprint 96mx lps message guide hp9420 host not communicating. See host for reason the hip diagnostic command was entered. The system failed test 1: (see explanation for message hp9400) or test 2: system was unable to send a command on...

  • Page 39: Messages

    Xerox docuprint 96/docuprint 96mx lps message guide 5-1 5. 5 ifu (interpress font utility) messages these messages appear when the interpress font utility program (refer to your docuprint 96/docuprint 96mx lps operations reference chapter on hip-accessed communicating modes for additional informatio...

  • Page 40

    Ifu (interpress font utility) messages 5-2 xerox docuprint 96/docuprint 96mx lps message guide if1100 font family xxxx this is an informational message indicating the font family name being compiled by the ipfnts command. Action none. If1102 adding xxxx point xxxx this is an informational message in...

  • Page 42

    Ifu (interpress font utility) messages 5-4 xerox docuprint 96/docuprint 96mx lps message guide if1503 replacing with substitute character this is an informational message advising that a particular character is being replaced with the substitute character. Action none. If1504 adding as rendered char...

  • Page 43

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-5 if1629 parser error there is a problem with parsing the parameters within a command. Action none. If2000 aborting add the add command to add font families to the interpress or data center font environments...

  • Page 44

    Ifu (interpress font utility) messages 5-6 xerox docuprint 96/docuprint 96mx lps message guide if2025 unknown parameter on add command one of the parameters (descriptive elements) in the add command is incorrect. Action check the add command and reenter it correctly. If2030 command not recognized an...

  • Page 45

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-7 if2050 please mount the next volume, number x this message instructs you to mount the next tape or cartridge volume. A message will then ask if you want to continue or abort the operation. Action 1. Mount ...

  • Page 46

    Ifu (interpress font utility) messages 5-8 xerox docuprint 96/docuprint 96mx lps message guide if2061 attempting to append to a non ifu copy medium. Mount correct medium or initialize the medium and retry appending an ifu copy write file to the end of a non ifu copy medium is not permitted. Action 1...

  • Page 47

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-9 if2098 are you sure you want to abort? (enter ‘y’ or ‘n’) an abort command was entered during the ifu copy read process. Action enter n. Note: the font structure on the disk may be corrupted if the process...

  • Page 48

    Ifu (interpress font utility) messages 5-10 xerox docuprint 96/docuprint 96mx lps message guide if2212 the wrong floppy has been mounted a floppy disk has been mounted out of sequence for reading in. A message will follow asking if you want to continue or quit this operation. Action mount the correc...

  • Page 49

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-11 if2235 please confirm deletion of wildcarded interpress font upon entering the ifu delete command, you are asked by the system to confirm this operation by entering c to continue or a to abort. Action ent...

  • Page 50

    Ifu (interpress font utility) messages 5-12 xerox docuprint 96/docuprint 96mx lps message guide if2250 medium must be tape or cartridge. Magnetic tape or cartridge are the only media possible for the add command (some commands do not accept floppy disks). Action reenter the command specifying either...

  • Page 51

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-13 if2336 map x was not found in ipfnts.Sys the requested interpress character mapping is not found in the character mapping tables that are stored in the ipfnts.Sys file. Action modify the font profile to r...

  • Page 52

    Ifu (interpress font utility) messages 5-14 xerox docuprint 96/docuprint 96mx lps message guide if2410 orientation parameter was not found in dcfonts statement orientation (i.E., portrait, landscape, iportrait, and ilandscape) has not been specified in the dcfonts statement in the font profile. Acti...

  • Page 53

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-15 if2428 orientation x was not found in easy values some orientations requested are not contained in the fis font master. Action none. If2434 missing name parameter on fonts statement an interpress font nam...

  • Page 54

    Ifu (interpress font utility) messages 5-16 xerox docuprint 96/docuprint 96mx lps message guide if2456 warning: substitute character requires extended metrics substitution of the requested character requires extended metrics, which may reduce interpress performance. Action none. If2701 syntax error:...

  • Page 55

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-17 if2708 syntax error: unexpected token x encountered the character or symbol indicated in the message is incorrectly included in the command line. Action reenter the command, omitting the incorrect charact...

  • Page 56

    Ifu (interpress font utility) messages 5-18 xerox docuprint 96/docuprint 96mx lps message guide if2720 syntax error in statement x an error exists in the given statement. Action check and reenter the command, using the corrected statement. If2730 semantic error in statement x an error exists in the ...

  • Page 57

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-19 if2852 invalid ftype parameter the ftype parameter in the font profile is incorrect. Action 1. Reenter the ftype parameter to include the correct parameter (either standard or extended). 2. Retry the add ...

  • Page 58

    Ifu (interpress font utility) messages 5-20 xerox docuprint 96/docuprint 96mx lps message guide if2860 invalid sections parameter the section parameter in the general statement of the font profile is incorrect. Action 1. Verify and reenter the appropriate sections parameter in the font profile. 2. R...

  • Page 59

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-21 if2903 jsl syntax err x - unclosed string there is an unclosed string in the jsl file. Action 1. Correct the jsl file to include a string enclosed in single quotes. 2. Retry the command. If2904 jsl syntax...

  • Page 60

    Ifu (interpress font utility) messages 5-22 xerox docuprint 96/docuprint 96mx lps message guide if2910 jsl syntax err x - expecting an equal sign after y the system requires an equal sign (=) after the given character in the jsl file. Action 1. Correct the jsl file to include the required equal sign...

  • Page 61

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-23 if2950 jsl file x will not open the requested jsl file in the ipfnts statement cannot be opened. Action verify and reenter the jsl file name correctly. If2951 jsl statement is too large to be processed th...

  • Page 62

    Ifu (interpress font utility) messages 5-24 xerox docuprint 96/docuprint 96mx lps message guide if2973 no valid characters were found in character set x in processing the fis master, the substitute character’s raster bitmap is either missing or defective. Action 1. Correct the chars parameter of the...

  • Page 63

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-25 if4111 fis processing error; aborting add due to an error in the fis master, the add command is being aborted. This error is probably the result of a previous error which should have displayed a message. ...

  • Page 64

    Ifu (interpress font utility) messages 5-26 xerox docuprint 96/docuprint 96mx lps message guide if7000 ** - write lock protection error - ** a write operation could not be completed successfully, probably because the write ring is not present on the magnetic tape. Action 1. Put a write enable ring o...

  • Page 65

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-27 if7108 temporary file x of decomposed fis will not open there is an ifu temporary access problem, probably due to a disk error or insufficient space. Action 1. Compress the disk and retry the command. 2. ...

  • Page 66

    Ifu (interpress font utility) messages 5-28 xerox docuprint 96/docuprint 96mx lps message guide if7705 family name directory will not open the fdr package is either not on the system or is corrupted action execute the ifu ipfnts command sequence to recreate the fdr file if7800 interpress decomposer ...

  • Page 67

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-29 if7902 cmt package error an error occurred while the system was processing the character mapping table, probably due to a disk error or insufficient space. Action 1. Compress the disk and retry the comman...

  • Page 68

    Ifu (interpress font utility) messages 5-30 xerox docuprint 96/docuprint 96mx lps message guide if7909 sample command failed, retry the command file ifsam$.Cmd, used to print out the fonts specified in the sample command, does not exist because the fopen command failed. This is a probable disk error...

  • Page 69

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-31 if7914 ipm input from file x, block y, failed the system failed in an attempt to read a block from an ipm file. The file is either corrupted or does not exist on the system. Action 1. Delete the ipm files...

  • Page 70

    Ifu (interpress font utility) messages 5-32 xerox docuprint 96/docuprint 96mx lps message guide if8103 cmt symbol table has overflowed by map x there was not enough space in the character mapping table when adding the next symbol. Action contact your systems specialist or xerox customer service. If8...

  • Page 71

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-33 if8203 error: from ipf_open ( ) the system is unable to open the ipfnts.Sys file. Either the file is not on the system or is corrupted or there is a software problem. Action 1. Check if the ipfnts.Sys fil...

  • Page 72

    Ifu (interpress font utility) messages 5-34 xerox docuprint 96/docuprint 96mx lps message guide f8210 error: from ipf_read_block ( ) entry ( ) an error occurred when the system attempted to access the ipfnts.Sys file. Either the file is not on the system or is corrupted, or there is a software probl...

  • Page 73

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-35 if8214 error: from dlm_add ( ) an error occurred when the system attempted to access the ifudlm.Sys file. Either the file is not on the system or is corrupted, or there is a software problem. Action 1. Ch...

  • Page 74

    Ifu (interpress font utility) messages 5-36 xerox docuprint 96/docuprint 96mx lps message guide if8218 error: from ffm_delete ( ) an error occurred when the system attempted to access the ifuffm.Sys file. Either the file is not on the system or is corrupted, or there is a software problem. Action 1....

  • Page 75

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-37 if8401 fis font request failed with emt return code x the fis font request cannot be processed due to the emt (emulator trap) return code shown. Action contact your systems specialist or xerox customer se...

  • Page 76

    Ifu (interpress font utility) messages 5-38 xerox docuprint 96/docuprint 96mx lps message guide if8409 missing font mapping header at file offset? The text that was just read from the written file on the medium was not as expected. The format of the file written by the write command is either corrup...

  • Page 77

    Ifu (interpress font utility) messages xerox docuprint 96/docuprint 96mx lps message guide 5-39 if9000 **- device is not ready -** the medium specified was not available when the operation was attempted, or during the operation. Action 1. Prepare the medium for operation and retry the command. 2. If...

  • Page 78

    Ifu (interpress font utility) messages 5-40 xerox docuprint 96/docuprint 96mx lps message guide if9099 device error x an input/output operation on the medium failed. Action refer to the error message appearing on the system controller keyboard display and take appropriate action. If9101 read error o...

  • Page 79: Oss (Operating System

    Xerpx docuprint 96/docuprint 96mx lps message guide 6-1 6. 6 oss (operating system software) messages the os messages appearing on your system controller display are generated by the operating system software (oss). These messages are assigned to levels 0 through 9. The higher the number, the more s...

  • Page 80

    Oss (operating system software) messages 6-2 xerox docuprint 96/docuprint 96mx lps message guide os0060 resuming full performance the printer had been operating in a reduced performance mode due to page complexity and is now returning to full performance. Action none. Os0200 main tray selected this ...

  • Page 81

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-3 os0320 output tray 2 selected one of the following commands was entered: -select -select 2 -select auto -select 2,sample output will be delivered to stacker tray 2. The printer control console displays: ...

  • Page 82

    Oss (operating system software) messages 6-4 xerox docuprint 96/docuprint 96mx lps message guide os0510 input stopped the stop or stop i command was entered, or the key was pressed. The system has stopped transmitting data and is reading it onto the system disk. Action to restart: enter continue or ...

  • Page 83

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-5 os0730 finishing exerciser utility: successful exit. Fex has successfully completed. Action none. Os0731 updating the iot‘s memory with test profile info fex is loading into the printer‘s non-volatile me...

  • Page 84

    Oss (operating system software) messages 6-6 xerox docuprint 96/docuprint 96mx lps message guide os0801 nvm update complete the periodic acquisition of information from the printer control console has been completed. Action none. Os0830 attention light enabled. The light enable command is entered an...

  • Page 85

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-7 os0853 mode: xxx housing, -plex during pqa, this message identifies the housings being adjusted and whether simplex or duplex printing is specified for the current pqa operation. This message may accompa...

  • Page 86

    Oss (operating system software) messages 6-8 xerox docuprint 96/docuprint 96mx lps message guide os0862 substituting color for all other inks for this report after you enter a valid substitute ink command, this message tells you the primary color which is being substituted for all primary colors (in...

  • Page 87

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-9 os0873 substituting color for color for this job after you enter a substitute ink command, this message tells you which primary color is being substituted for the specified color in your current job. Act...

  • Page 88

    Oss (operating system software) messages 6-10 xerox docuprint 96/docuprint 96mx lps message guide os level 1: information informs you of system activities. Os1000 ready for commands hh:mm:ss the system is ready to process commands entered. (the time of day is displayed after the message.) action ent...

  • Page 89

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-11 os1006 printer is not available; printer is being serviced the printer is unable to respond to the entered command because the xerox service representative is performing diagnostic tests. The printer co...

  • Page 90

    Oss (operating system software) messages 6-12 xerox docuprint 96/docuprint 96mx lps message guide os1010 starting job xxxx the system is initiating processing for the indicated job. Action none. Os1011 starting diagnostic print job the system diagnostic interface (sdi) task is involved. Action none....

  • Page 91

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-13 os1017 physical device %0 substituted for logical device %1. The device substitution specified in the sub dev command has taken place. Action none. Os1020 job xxxx has completed input phase all requeste...

  • Page 92

    Oss (operating system software) messages 6-14 xerox docuprint 96/docuprint 96mx lps message guide os1072 bar off, n count satisfied, reader is now enabled the command bar off n was entered disabling the barcode reader for a specified number of sheets. The count specified as n was reached and the bar...

  • Page 93

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-15 os1096 activity report ending processing of the activity report has completed. No action. Action none. Os1097 user report ending processing of the user report has completed. No action. Action none. Os11...

  • Page 94

    Oss (operating system software) messages 6-16 xerox docuprint 96/docuprint 96mx lps message guide os1106 lowercase characters not valid in machine serial number lowercase characters are not valid in the machine serial number. Action 1. Verify the tray(s) or bin(s) in your command. Or select a differ...

  • Page 95

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-17 os1136 sheet rotation: ‘0’ = none or ‘1’ = rotate sheet: this is one of a series of fex questions about the test print job, which also includes messages os2922, os2923, os2924, and os2008. Action enter ...

  • Page 96

    Oss (operating system software) messages 6-18 xerox docuprint 96/docuprint 96mx lps message guide os1190 invalid parameter, command ignored. An undefined bin is specified or the sheet count for the bin is not within the allowable range. Action 1. Verify the bin and reenter the command or 2. Change t...

  • Page 97

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-19 os1235 clp commands not allowed while printing a clp command was entered. Clp commands may not be used while the printer is active. Action none. Os1240 status command inoperative the key was pressed or ...

  • Page 98

    Oss (operating system software) messages 6-20 xerox docuprint 96/docuprint 96mx lps message guide os1262 sysgen paper size out of range if a paper size statement is not included in the jdl, the system will use the values specified at sysgen. This message indicates that the sysgen value is not suppor...

  • Page 99

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-21 os1270 command file aborted the @abort command was entered. The system has abandoned processing of the initiated command file. Action none. Os1271 cannot nest command files. Check and retry. The command...

  • Page 100

    Oss (operating system software) messages 6-22 xerox docuprint 96/docuprint 96mx lps message guide os1279 command file error - label not found an incorrect prefix was entered for the command file. Action reenter the statement correctly. Os1280 message file is not defined. Requesting ******; message f...

  • Page 101

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-23 os1291 cluster name not defined. Or cluster *** cluster has no current trays *** you have entered a pqa command or a job start command containing an undefined cluster or one with no current trays. Actio...

  • Page 102

    Oss (operating system software) messages 6-24 xerox docuprint 96/docuprint 96mx lps message guide os1296 there is no stockset specified at this time the cluster set or cluster set n/r command was entered but the collection of stocks to be used in the print job has not been specified. (refer to your ...

  • Page 103

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-25 action none. Os1322 lead edge screen setting is nn this message confirms that your edge (lead edge screen) command parameters have been accepted or provides you with the current settings if you have not...

  • Page 104

    Oss (operating system software) messages 6-26 xerox docuprint 96/docuprint 96mx lps message guide os1331 xps accounting aborted xps has stopped accumulating accounting data because there is a disk access error. Action none. Os1332 xps accounting resumed xps resumes the accumulation of accounting dat...

  • Page 105

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-27 os1380 alignment is nn scan lines and nn dots printed data will appear at the indicated number (76-260) of lines from the top and bottom edges of paper, and the indicated number (0-795) of dots from the...

  • Page 106

    Oss (operating system software) messages 6-28 xerox docuprint 96/docuprint 96mx lps message guide os1410 sample not allowed by jde the key was pressed but jde specified abnormal security = yes. The system cannot produce a sample print. The printer control console displays: sample cannot be printed--...

  • Page 107

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-29 os1421 page spacing not allowed for n-1 report page spacing is not allowed when printing n-1. Action none. Os1430 block spacing not allowed by jde the space n blocks command was entered. Jde specified a...

  • Page 108

    Oss (operating system software) messages 6-30 xerox docuprint 96/docuprint 96mx lps message guide os1510 page spacing stopped by end-of-report the space n pages command was entered. The system cannot space forward any more because it sensed a tape label indicating the end of the report. Action none....

  • Page 109

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-31 os1540 cannot space past start of job one of the following commands was entered: move n blocks move n files space n pages space n reports the system has reached the beginning of a job and cannot space b...

  • Page 110

    Oss (operating system software) messages 6-32 xerox docuprint 96/docuprint 96mx lps message guide os1554 insufficient file space for accounting the account add, department command was entered. The system cannot add the department name because all available entries have been used. Action enter the cs...

  • Page 111

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-33 os1560 tape rewind complete the system has finished rewinding the tape. Action none. Os1561 font mapping does not exist for file-name.Fnt. There is no font mapping to run the job. Job processing will co...

  • Page 112

    Oss (operating system software) messages 6-34 xerox docuprint 96/docuprint 96mx lps message guide os1585 can‘t read message file. No ethernet error page printed the system cannot print the error page at the end of the ethernet- transmitted report because the required message file is missing. Action ...

  • Page 113

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-35 os1650 output processing has caught up with input processing all completed pages of input data have been printed. Output is waiting for more pages to print. Or occurs when n-1 printing is invoked and th...

  • Page 114

    Oss (operating system software) messages 6-36 xerox docuprint 96/docuprint 96mx lps message guide os1730 clear invalid with display, clear ignored the editor clear command was entered while the display command was in effect. The system cannot clear the working file because sections of it are being d...

  • Page 115

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-37 os1780 “online” input is receiving data data is being transmitted from the host and written to the system disk. Action none. Os1781 “online” jde/jdl host and device type mismatch the jde/jdl in effect i...

  • Page 116

    Oss (operating system software) messages 6-38 xerox docuprint 96/docuprint 96mx lps message guide os1820 output processing is aborting current report the automatic job recovery attempt was unsuccessful. The current report has been deleted. Action restart the job os1821 cannot get lun assignment. Sdi...

  • Page 117

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-39 os1830 printing 1 copy of current report the “print 1” option was selected in response to “disk saturation” message os6300 or os2871. Multiple-copy printing of the current report has discontinued and th...

  • Page 118

    Oss (operating system software) messages 6-40 xerox docuprint 96/docuprint 96mx lps message guide os1927 this system does not support ethernet processing the command entered applies only to ethernet. The system is not equipped with the ethernet controller option for operating on the network. Action ...

  • Page 119

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-41 os1962 the ‘pqa continue’ parameter is not allowed with the current selections. For the docuprint 96/docuprint 96mx lps, you have entered the pqa command with the continue option, but have not met the r...

  • Page 120

    Oss (operating system software) messages 6-42 xerox docuprint 96/docuprint 96mx lps message guide os1970 fex exiting. Unable to run during a print job. Fcg exiting. Unable to run during a print job. (4050/4090/4650 only) the lps printer is actively running a print job. Therefore, fex cannot begin pr...

  • Page 121

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-43 os1979 nvm address . . . (4050/4090/4650) this message either lists a series of four wire management or seven third party device parameters for you to enter or simply gives the current values. N8 :% wir...

  • Page 122

    Oss (operating system software) messages 6-44 xerox docuprint 96/docuprint 96mx lps message guide os1982 fcg exiting. Invalid profile encountered. (4050/4090/4650 only) the system cannot accept the parameters or values you have entered. The cause may be incorrect syntax, too many characters, etc. Th...

  • Page 123

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-45 os level 2: routine maintenance states a condition and explains what action(s) to take. Os2000 enter ‘continue o’ to resume printing or select ‘continue o’ to resume printing printing was interrupted by...

  • Page 124

    Oss (operating system software) messages 6-46 xerox docuprint 96/docuprint 96mx lps message guide os2004 paper trays not set for same size the length guides of the feeder trays are adjusted for different paper lengths. Automatic switching will not be possible. (this is an information message appeari...

  • Page 125

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-47 os2007 empty sample output tray the sample tray contains more than 100 sheets. It must be emptied for printing to resume. The printer control console displays: empty sample tray action remove output fro...

  • Page 126

    Oss (operating system software) messages 6-48 xerox docuprint 96/docuprint 96mx lps message guide os2025 remount volume n for next copy of report. Con i when ready. This message appears when making multiple copies of multi-volume reports in a noncollate mode. This includes reports with copy- sensiti...

  • Page 127

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-49 os2055 establishing communications with iot. The output task is establishing communication with the printer. Until communications are established, printer status information is not available. Action non...

  • Page 128

    Oss (operating system software) messages 6-50 xerox docuprint 96/docuprint 96mx lps message guide os2070 paper tray 2 is empty no paper remains in feeder tray 2. The printer control console displays one of the following: both trays set for _._x_._" paper both trays set for _x_mm paper paper tray 2 i...

  • Page 129

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-51 os2091 no available trays are ready the tray(s) available for your job are not ready to be used. Possible causes may be that they are empty, have the wrong type of stock, are not properly latched, etc. ...

  • Page 130

    Oss (operating system software) messages 6-52 xerox docuprint 96/docuprint 96mx lps message guide os2220 output tray 2 is full stacker tray 2 contains its capacity amount of sheets. The printer control console displays one of the following: job is printing. Output tray 2 is full. Output tray 2 is fu...

  • Page 131

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-53 os2260 paper in selected tray too large. Change if desired. The paper length guide in the selected tray is set for paper of a larger size than that set at mini-sysgen. Printing stops. (this message is f...

  • Page 132

    Oss (operating system software) messages 6-54 xerox docuprint 96/docuprint 96mx lps message guide os2262 paper in cluster xxxx is too large the specified cluster contains paper that is larger than that specified by the print job action change the paper in the specified cluster. Or change the feed co...

  • Page 133

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-55 os2288 warning: current select command overrides data destination value. Change select command or con o the data stream contains a destination=export statement, and the current operator select keyin is ...

  • Page 134

    Oss (operating system software) messages 6-56 xerox docuprint 96/docuprint 96mx lps message guide os2296 log printing not allowed until system status=’idle the system must be offline and not printing to process a log print request. Action complete or abort any current jobs, enter the offline command...

  • Page 135

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-57 os2400 printer misfeed detected. Check paper supply. Paper was improperly fed from the main and/or auxiliary feeder tray, causing a jam condition. Action release the feeder belt and check both feeder tr...

  • Page 136

    Oss (operating system software) messages 6-58 xerox docuprint 96/docuprint 96mx lps message guide os2512 color housing: not present this message is displayed if a color housing is not installed in the printer before the printer doors are closed. Action none. Os2513 color housing is needed for this r...

  • Page 137

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-59 os2570 vary system offline at the host and enter ‘continue i’ or vary system offline at the host and select ‘continue i’ the offline command was entered. Action 1. Follow procedures required to take the...

  • Page 138

    Oss (operating system software) messages 6-60 xerox docuprint 96/docuprint 96mx lps message guide action retry the operation, using one of these two file-types. Os2613 ink parameter required on sample command you have entered a command which is missing an ink-name or a file containing an ink-name. I...

  • Page 139

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-61 os2670 enter pqa or sub ink command or abort report or print job. The color housing is not ready. This message is displayed when the system requires a print quality adjustment (pqa). Action enter the pq...

  • Page 140

    Oss (operating system software) messages 6-62 xerox docuprint 96/docuprint 96mx lps message guide os2676 ink substitution is not allowed by this job. You have requested ink substitution but ink substitution is not allowed by the job. Action none. Os2677 no ink substitutions are in effect. This messa...

  • Page 141

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-63 os2683 change housing for color printing or this message is displayed when a problem occurs with the current color housing. It is followed by these messages: os2673 enter the sub ink command or abort th...

  • Page 142

    Oss (operating system software) messages 6-64 xerox docuprint 96/docuprint 96mx lps message guide os2710 invalid command reenter. A command was entered that the system does not recognize, or a command was improperly keyed in. Action 1. Reenter the command correctly. 2. If the message reappears, the ...

  • Page 143

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-65 os2720 invalid control key. Retry the system cannot respond at this time to the function key that was pressed due to a conflicting process or condition of the printer. Action wait until the process has ...

  • Page 144

    Oss (operating system software) messages 6-66 xerox docuprint 96/docuprint 96mx lps message guide os2740 jde not found. Check and retry. The jde entered in the start command does not exist on the system disk. Action reenter the start command with the correct jde. (refer to the online chapter in your...

  • Page 145

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-67 os2800 move or space function complete. The system has completed spacing over information on magnetic tape as requested. Action enter the continue i command if the place where input is resuming has the ...

  • Page 146

    Oss (operating system software) messages 6-68 xerox docuprint 96/docuprint 96mx lps message guide os2825 complete online jobs. Then vary system offline. A task was requested for which the system must be offline. Action 1. Enter the continue command or press the key to process remaining jobs. Or comp...

  • Page 147

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-69 os2871 sdi job saturates shared disk - possible actions: release sdi jobs and enter ’continue i’ enter ’print 1’ to print 1 copy of current report enter ’abort job #’ to abort current job a disk full de...

  • Page 148

    Oss (operating system software) messages 6-70 xerox docuprint 96/docuprint 96mx lps message guide os2910 no accounting file entry for department. No accounting file was set up at installation for the department name entered. The system will report data in a “nodept” file. Action enter the account co...

  • Page 149

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-71 os2950 software timing problem has caused a printer cycle-down input is being processed too rapidly for output to print. Output has stopped. Action enter the continue o command to resume printing. Os296...

  • Page 150

    Oss (operating system software) messages 6-72 xerox docuprint 96/docuprint 96mx lps message guide os level 3: printer problem indicates specific docuprint 96/docuprint 96mx lps problems and explains what action(s) to take. Os3001 check printer doors and top covers a door or cover on the printer is n...

  • Page 151

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-73 os3003 paper tray 2 fault--see message at printer feeder tray 2 has not risen completely, or a paper jam has occurred at the area indicated on the printer control console display. The printer control co...

  • Page 152

    Oss (operating system software) messages 6-74 xerox docuprint 96/docuprint 96mx lps message guide os3005 unusable sheets cleared to sample tray. The printer is purging any pages that are damaged or have poor print quality. Pages will be delivered to the sample tray and printing will resume where it ...

  • Page 153

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-75 os3008 transparencies loaded--print simplex to sample tray. Transparencies were loaded in selected tray. Jsl did not specify simplex printing or delivery to the sample tray. The job will not print. The ...

  • Page 154

    Oss (operating system software) messages 6-76 xerox docuprint 96/docuprint 96mx lps message guide os3010 printer is warming up. The printer is unable to respond to the entered command because the fuser has cooled to below operating temperature. Action 1. Wait for the fuser to reheat (the warmup ligh...

  • Page 155

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-77 os3012 paper tray 3 fault -- see message at printer. Feed tray 3 has not risen completely or a paper jam has occurred at the area indicated on the printer control console display. Action 1. Press the i ...

  • Page 156

    Oss (operating system software) messages 6-78 xerox docuprint 96/docuprint 96mx lps message guide os3025 if fault continues enter ‘sel tray’ or ‘abort o’ or a fault in the collection area of the stitcher/stacker has occurred (followed by message os2000 press continue to resume printing). Action pres...

  • Page 157

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-79 os3400 printer jam... See printer message. A paper jam has occurred at the area indicated on the printer control console display. The printer control console displays one of the following: check for pap...

  • Page 158

    Oss (operating system software) messages 6-80 xerox docuprint 96/docuprint 96mx lps message guide os3710 set integrity problem. Partial set ejected. The integrity of the current set in the stitcher/stacker‘s collection area is questionable; i.E., a page has been skipped. Action 1. Check the output. ...

  • Page 159

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-81 os level 4: system or tape problem states a problem and explains what action(s) to take. Os4010 cannot find end of tape reflector strip. ‘continue i’ the system did not encounter the end of tape (eot) l...

  • Page 160

    Oss (operating system software) messages 6-82 xerox docuprint 96/docuprint 96mx lps message guide os4150 input drive is offline. ‘continue i’ when it is ready. The start or move command was entered while the tape drive was not online to the printer. Action 1. Press the on line button on the tape dri...

  • Page 161

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-83 os4500 bad block on input medium. Do one of the following: software has encountered an unreadable block. Action 1. Do one of the following: * move -1 blocks to retry read enter the move -1 blocks and co...

  • Page 162

    Oss (operating system software) messages 6-84 xerox docuprint 96/docuprint 96mx lps message guide os4651 output has recovered to page boundary. Automatic job recovery has been initiated after a system rollover. Output has resumed printing at the page where the software failure occurred. Action follo...

  • Page 163

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-85 os4820 power interruption. A power failure has occurred, or the system was inadvertently turned off. Action reboot the system when power is restored. Os4900 system disk write protected: reset write prot...

  • Page 164

    Oss (operating system software) messages 6-86 xerox docuprint 96/docuprint 96mx lps message guide os level 6: job integrity identifies possible errors affecting output and what action(s), if any, to take. Os6000 insufficient memory for ‘acctinfo’; continue or abort? Jsl specified the ‘acctinfo’ opti...

  • Page 165

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-87 os6010 tape "label error" messages os6010 label error: invalid label format; continue or abort? Os6011 label error: vol 1; continue or abort? Os6012 label error: hdr 1; continue or abort? Os6013 label e...

  • Page 166

    Oss (operating system software) messages 6-88 xerox docuprint 96/docuprint 96mx lps message guide c. If there are no jsl errors, enter the start n, dump command to obtain a tape dump for analysis. D. Recreate the job with correct tape labels. (refer to your xerox lps tape formats manual.) note: chec...

  • Page 167

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-89 os6102 disk read error - rtext file. The rtext statement is entered incorrectly in jde. The system cannot read it. Action 1. Press the key to resume printing. The rtext message will not print. Or enter ...

  • Page 168

    Oss (operating system software) messages 6-90 xerox docuprint 96/docuprint 96mx lps message guide os6190 graphic file xxxxxxx not found. The graphic file specified by jde does not exist on the system disk. The job will abort. Action 1. Reload the desired file onto the system disk. (refer to your doc...

  • Page 169

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-91 os6195 page interleaved graphic xxxxxx read but not referenced. A graphic interleaved with text is being input but is not referenced by a djde. The graphic will not be printed. Action 1. Recode djde, re...

  • Page 170

    Oss (operating system software) messages 6-92 xerox docuprint 96/docuprint 96mx lps message guide os6300 current report saturates disk. Enter option: “continue i” - continue multicopy mode. The report currently being input exceeds the capacity of the print file. Select one of the following: action e...

  • Page 171

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-93 os6500 cannot validate first data record; space to next report. The tape record or block does not conform to the description in jsl. Action 1. Enter the space 1 reports command to go to the next report....

  • Page 172

    Oss (operating system software) messages 6-94 xerox docuprint 96/docuprint 96mx lps message guide os6555 interpress data extraction error. An error has occurred when the software was decoding information from the interpress master for use by the docuprint 96/docuprint 96mx lps. Action 1. Check for a...

  • Page 173

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-95 os6565 unable to read idr from disk. Input cannot access idr file from disk. Action check and retry. Os6660 begin value is off the page. The begin statement in jdl specifies that print is to start at a ...

  • Page 174

    Oss (operating system software) messages 6-96 xerox docuprint 96/docuprint 96mx lps message guide os6670 form paper size too small. Form will not be printed. The paper size specified for the form called up for the current job is smaller than the size specified by the papersize statement in jsl. Inpu...

  • Page 175

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-97 os6706 djde error - illegal disk interleaved graphic callout. The current job contains djde specifying a shared disk (sd) interleaved graphic. The system cannot call up the graphic because the job is no...

  • Page 176

    Oss (operating system software) messages 6-98 xerox docuprint 96/docuprint 96mx lps message guide os6712 djde processing error: jdl not found. The jdl invoked by djde statement jdl = jdl-id does not exist on the system disk. Action 1. Enter the continue i command to continue to process the job. Djde...

  • Page 177

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-99 os6721 djde processing error: invalid loadable pde. The pde file loaded from magnetic tape has an incorrect format. The job will not print correctly. Action 1. Enter the abort command to cancel the job....

  • Page 178

    Oss (operating system software) messages 6-100 xerox docuprint 96/docuprint 96mx lps message guide os6728 djde processing error: feed stock not in stockset a djde feed option calls out a stock that is not in the stockset defined for the current cluster. Action 1. Enter the feed cluster name to speci...

  • Page 179

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-101 os6733 file x overflow—excess card image data lost. The file indicated contains more card-images than specified in djde. The extra card-images will not be copied to disk. Action 1. Recode djde, specify...

  • Page 180

    Oss (operating system software) messages 6-102 xerox docuprint 96/docuprint 96mx lps message guide os6737 file processing error—security violation. The file being sent has the same file name as a file on disk that is protected by abnormal security = yes command. The existing file cannot be replaced ...

  • Page 181

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-103 os6754 word processing merge job - switch codes missing. During printing, a file was discovered to be incorrectly formatted, or wrong switch code was entered in ccl merge command. Action resend job, co...

  • Page 182

    Oss (operating system software) messages 6-104 xerox docuprint 96/docuprint 96mx lps message guide os6780 unsupported jdl option may jeopardize job integrity. You have submitted a parameter in a djde or pdl command, such as sesmap or trans, which is not supported by 4050, 4090, 4650 printers. The ap...

  • Page 183

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-105 os6821 improper color-name specification. The ink-name you have specified contains either incorrect characters or more than 32 characters. Action check the ink-name(s) you have specified and retry the ...

  • Page 184

    Oss (operating system software) messages 6-106 xerox docuprint 96/docuprint 96mx lps message guide os6900 data on page exceeds page size. Check output. There is too much data to fit on the page being imaged. Some data may have been imaged off the page. Action check printed output. If overflow has oc...

  • Page 185

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-107 os6920 line exceeded page limit. Line truncated. A new margin has taken effect or a new line was started. Current line length is longer than page size. The excess has been cut off. Action 1. Check the ...

  • Page 186

    Oss (operating system software) messages 6-108 xerox docuprint 96/docuprint 96mx lps message guide os6952 imaging error. Possible data off page. Page integrity cannot be guaranteed, therefore page will not be printed. An imaging error has occurred on the current page. Action 1. Press the key to cont...

  • Page 187

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-109 os level 7: system problem indicates a problem with a specific job. Run the next job and report the problem to your supervisor. Os7100 pcc or translate table unreadable. The system cannot read the prin...

  • Page 188

    Oss (operating system software) messages 6-110 xerox docuprint 96/docuprint 96mx lps message guide os7210 input cannot recover —not enough dynamic memory. Automatic job recovery has been attempted after a software failure caused a system rollover. The system is unable to recover data because insuffi...

  • Page 189

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-111 os7401 jde/jdl require online mode. Enter “online” the jde or jdl specified requires the system to be online. Action 1. Restart the job with a different jde/jdl id. Or enter the online command to place...

  • Page 190

    Oss (operating system software) messages 6-112 xerox docuprint 96/docuprint 96mx lps message guide os7500 insufficient memory for jde. Os7510 insufficient memory for jde tables. Os7520 insufficient memory for vfu tables. Os7530 insufficient memory for cme tables. Os7550 insufficient memory for input...

  • Page 191

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-113 os7830 insufficient dynamic memory for fountainheads. Not enough dynamic memory remains to process the font index option; or multiple djde “jde =” or “jdl =” commands were incorrectly invoked. The job ...

  • Page 192

    Oss (operating system software) messages 6-114 xerox docuprint 96/docuprint 96mx lps message guide os7950 unable to open print file... Enter “reset” then rea. The print file on the system disk was left in such state that it cannot be opened. The job will not print. Action 1. Enter the reset command....

  • Page 193

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-115 os level 8: probable severe software error warns of probable severe software errors. Os8010 input found nothing to print. The file just processed by input has generated no printed output. The file is a...

  • Page 194

    Oss (operating system software) messages 6-116 xerox docuprint 96/docuprint 96mx lps message guide os8051 ipd communication; initialization failure. An unexpected error was detected when attempting to open communications with input and the job was then aborted. Action 1. Reset the system before ente...

  • Page 195

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-117 os8100 requested task already active - reboot the system. The task requested is still active improperly, possibly due to improper job recovery after a software failure. Action press the boot button and...

  • Page 196

    Oss (operating system software) messages 6-118 xerox docuprint 96/docuprint 96mx lps message guide os8410 byte aligned disk i/o request... Input aborting. The input task issued a disk input/output request on a byte boundary rather than a correct word boundary. The job is aborting. Action 1. Restart ...

  • Page 197

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-119 os8555 drive xxx not useable: wrong disk id. The indicated disk drive cannot be used because it was moved from another system and was not formatted for this one. Action reformat the disk. (refer to you...

  • Page 198

    Oss (operating system software) messages 6-120 xerox docuprint 96/docuprint 96mx lps message guide os8704 output task does not match ig/printer type. Sysgen was performed with a configuration that does not match the current configuration. Action resysgen with the proper configuration if authorized t...

  • Page 199

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-121 os8855 invalid form file header. The input task is unable to read a form file header due to software or disk/cpu problems. The job will abort. Action 1. Recompile the form with the correct file header....

  • Page 200

    Oss (operating system software) messages 6-122 xerox docuprint 96/docuprint 96mx lps message guide os8980 unable to initiate input task. The requested input task cannot be found or read from disk. Action 1. Enter the reset command. 2. Restart the job. 3. If the message reappears, reboot the system b...

  • Page 201

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-123 os level 9: probable severe hardware error warns of probable hardware errors. Os9050 unexpected error detected by rip. Enter: a rip error has occurred. You will be prompted to continue or abort. Action...

  • Page 202

    Oss (operating system software) messages 6-124 xerox docuprint 96/docuprint 96mx lps message guide os9103 disk error with ipd message file, etnmsg.Sys. The system detected a read error the interpress message file and could not generate the job error summary; the error summary is stopped at this poin...

  • Page 203

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-125 os9210 parity error on input medium. A parity error has been discovered in the magnetic tape input buffer in cpu memory. (the error was not reported by the magnetic tape drive itself.) or the message a...

  • Page 204

    Oss (operating system software) messages 6-126 xerox docuprint 96/docuprint 96mx lps message guide os9310 output disk error. Page won‘t be printed. Abort o or the page cannot be printed because print data cannot be read off disk due to a system disk error. (this message is followed by message os2000...

  • Page 205

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-127 os9369 nvm failed to clear. The printer is unable to clear and reset the error count (non-volatile memory) used by the xerox service representative. Printing continues. Action contact your systems spec...

  • Page 206

    Oss (operating system software) messages 6-128 xerox docuprint 96/docuprint 96mx lps message guide os9460 disk error - ocs. Call for service. Os9500 bad block on disk - input. Call for service. Os9530 disk error - input. Call for service. Os9531 disk error - processing djde‘s. Os9532 disk write erro...

  • Page 207

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-129 os9800 hardware error/disk - input. Call for service. A fatal system disk error has occurred in input. Action 1. Restart the job. 2. If the failure recurs, contact your systems specialist or xerox cust...

  • Page 208

    Oss (operating system software) messages 6-130 xerox docuprint 96/docuprint 96mx lps message guide os9989 unable to acquire memory for device drivers: memory problems are sufficiently severe that there is not enough memory to load hardware peripheral handler(s). Action 1. Reboot the system by pressi...

  • Page 209

    Oss (operating system software) messages xerox docuprint 96/docuprint 96mx lps message guide 6-131 os9994 unable to find system tasks. The disk files required for proper operation of the system appear to have been destroyed on the system disk. Action 1. Reboot the system by pressing the boot button,...

  • Page 210

    Oss (operating system software) messages 6-132 xerox docuprint 96/docuprint 96mx lps message guide os9998 unable to acquire memory for initialization. Memory problems are sufficiently severe that there is not enough memory to initialize the system at startup. Action 1. Reboot the system by pressing ...

  • Page 211: Pdl (Job Source Library

    Xerox docuprint 96/docuprint 96mx lps message guide 7-1 7. 7 pdl (job source library compilation) messages these messages may appear while a job source library is being compiled using print description language (pdl). Pdl messages are assigned to levels 0-9, depending on the severity of the conditio...

  • Page 212

    Pdl (job source library compilation) messages 7-2 xerox docuprint 96/docuprint 96mx lps message guide pd0250 replace denied by operator. The operator has specified noreplace in the pdl invocation line. No action is needed. Action none. Pd0300 nothing to print, pdl terminated. When pdl encounters a p...

  • Page 213

    Pdl (job source library compilation) messages xerox docuprint 96/docuprint 96mx lps message guide 7-3 pd1110 jsl contains unsupported features. There are features invoked in the jsl which are not currently supported by the docuprint 96/docuprint 96mx. Action none. Pd1200 use the ifu ipfnts command t...

  • Page 214

    Pdl (job source library compilation) messages 7-4 xerox docuprint 96/docuprint 96mx lps message guide pd7050 tape record size error. The record size entered in jsl is incorrect for the tape format. Action enter the correct record size pd7200 pdl internal table overflow. Not enough dynamic memory rem...

  • Page 215

    Pdl (job source library compilation) messages xerox docuprint 96/docuprint 96mx lps message guide 7-5 pd8550 i/o error, processing sef mapping file. An i/o error occurred while processing the short edge feed font mapping file. Action recompile the jsl that generated the requested mapping file and re...

  • Page 216

    Pdl (job source library compilation) messages 7-6 xerox docuprint 96/docuprint 96mx lps message guide pd9510 pdl restart error opening save file. At termination of pdl processing, an attempt to save the file was unsuccessful due to a system disk error. Action 1. Recompile jdl and retry 2. If the pro...

  • Page 217: Pg (Purge Command)

    Xerox docuprint 96/docuprint 96mx lps message guide 8-1 8. 8 pg (purge command) messages these messages may appear during process of purging disk or print file. Refer to your docuprint 96/docuprint 96mx lps operations reference for detailed information about the purge command. Pg0100 processing the ...

  • Page 218

    Pg (purge command) messages 8-2 xerox docuprint 96/docuprint 96mx lps message guide pg0217 purging hip spool file. The purge command is removing unwanted data from the hip spool file. Action none pg0300 processing the entire disk except the print file. The purge f command was entered. The system is ...

  • Page 219: Pr (Hardcopy Graphics

    Xerox docuprint 96/docuprint 96mx lps message guide 9-1 9. 9 pr (hardcopy graphics printing command) messages these messages may appear during the hardcopy process (printing copy of graphic .Img files with comprehensive descriptor page). Refer to your docuprint 96/docuprint 96mx lps operations refer...

  • Page 220

    Pr (hardcopy graphics printing command) messages 9-2 xerox docuprint 96/docuprint 96mx lps message guide pr2600 not enough space on disk to hardcopy. The selected file cannot be hardcopied because the print file is not large enough to hold it action 1. Use the reallocate command to enlarge the print...

  • Page 221

    Pr (hardcopy graphics printing command) messages xerox docuprint 96/docuprint 96mx lps message guide 9-3 pr2780 no files found matching mask no files were found containing file name characters entered in the “mask” option of the hardcopy command. Action 1. Recheck and correct “mask” characters. (ref...

  • Page 222

    Pr (hardcopy graphics printing command) messages 9-4 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 223: 10.

    Xerox docuprint 96/docuprint 96mx lps message guide 10-1 10. 10 psc (printer subsystem controller command) messages the psc command enables the selectable download of a printer controller and rip software. (refer to your docuprint 96/ docuprint 96mx lps operations reference chapter on managing lps r...

  • Page 224

    Psc (printer subsystem controller command) messages 10-2 xerox docuprint 96/docuprint 96mx lps message guide ps9001 csi download error —csi not loaded. The csi board is not functional. Action contact your systems specialist or the xerox customer service. Ps9002 scsi download failed—executing from ro...

  • Page 225

    Psc (printer subsystem controller command) messages xerox docuprint 96/docuprint 96mx lps message guide 10-3 ps9960 download error: san nn.Nn this message provides the software analysis code (san) needed by xerox customer service to correct the download error. Action none ps9961 download error: san ...

  • Page 226

    Psc (printer subsystem controller command) messages 10-4 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 227: 11.

    Xerox docuprint 96/docuprint 96mx lps message guide 11-1 11. 11 scale command messages the scale command enables scanned graphic images (fonts, forms, and logos) to print at an enlarged or reduced size under certain conditions. Refer to your docuprint 96/docuprint 96mx lps operations reference chapt...

  • Page 228

    Scale command messages 11-2 xerox docuprint 96/docuprint 96mx lps message guide **edim meta-code not supported** the extended dimension (edim) function cannot be scaled to 600 spi. Action none. Enter input file name or to exit. An input file name must be included in the command to invoke scale. Acti...

  • Page 229

    Scale command messages xerox docuprint 96/docuprint 96mx lps message guide 11-3 **file type in output name must be xxxx the file type in the output name must be from an acceptable font directory. Action reenter the output name using a font from the specified directory. Acceptable file types are fnt,...

  • Page 230

    Scale command messages 11-4 xerox docuprint 96/docuprint 96mx lps message guide **font scaling resulted in size mismatch** scaling caused a mismatch between the estimated and actual bitmap sizes. Action contact your systems specialist or xerox customer support. **font xxxx is not alpha-numeric** the...

  • Page 231

    Scale command messages xerox docuprint 96/docuprint 96mx lps message guide 11-5 **more than one white space character not supported** the requested form consists of a format which cannot be scaled to 600 spi correctly. Action none **no dynamic memory** there is no dynamic memory available. Action co...

  • Page 232

    Scale command messages 11-6 xerox docuprint 96/docuprint 96mx lps message guide **run font through fix on cd/ig version 2 or higher** the font must be modified through the fix command before scaling. Action 1. Enter the appropriate fix command. (refer to your docuprint 96/docuprint 96mx lps operatio...

  • Page 233

    Scale command messages xerox docuprint 96/docuprint 96mx lps message guide 11-7 scaling header. The font or logo header is being scaled. Action none scaling logo: xxxx the requested logo is being scaled. Action none. Scaling tl number: n text line number n is being scaled. Action none scaling tl/dl ...

  • Page 234

    Scale command messages 11-8 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 235: 12.

    Xerox docuprint 96/docuprint 96mx lps message guide 12-1 12. 12 sfs (status file services command) messages the following messages refer to the status file services (sfs) command, which creates, clears, displays, prints, and stores status file information. Refer to your docuprint 96/docuprint 96mx l...

  • Page 236

    Sfs (status file services command) messages 12-2 xerox docuprint 96/docuprint 96mx lps message guide sf2100 invalid field for ‘byte counter’ sf2100 invalid terminating character sf2102 invalid field for ‘record length’ sf2103 invalid field for ‘tape density’ sf2104 invalid field for ‘size’ sf2105 in...

  • Page 237

    Sfs (status file services command) messages xerox docuprint 96/docuprint 96mx lps message guide 12-3 sf4500 cannot write on tape. Check tape and try again. The write enable ring is missing from magnetic tape, magnetic tape is not loaded correctly, or the magnetic tape drive is not online to the prin...

  • Page 238

    Sfs (status file services command) messages 12-4 xerox docuprint 96/docuprint 96mx lps message guide sf6050 a - cannot open file. Abort the command file needed for the user-created form cannot be accessed due to system disk error. (“a -” indicates sfs is aborting.) action 1. Retry compiling the form...

  • Page 239

    Sfs (status file services command) messages xerox docuprint 96/docuprint 96mx lps message guide 12-5 sf6070 e - value for ‘width’ unspecified or exceeds limit. The value entered for the width statement for a user-created form is larger than that permitted for the column width; or no width statement ...

  • Page 240

    Sfs (status file services command) messages 12-6 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 241: 13.

    Xerox docuprint 96/docuprint 96mx lps message guide 13-1 13. 13 system verification error messages these messages appear on the system controller display if problems are detected during the verification self-tests that the system runs at start-up after the date and time display is entered or disable...

  • Page 242

    System verification error messages 13-2 xerox docuprint 96/docuprint 96mx lps message guide fcg starting. Version x fcg is starting with the parameters (or version) indicated. Action 1. Retry the fcg command. 2. If the message reappears, look for other system or printer messages to explain the condi...

  • Page 243

    System verification error messages xerox docuprint 96/docuprint 96mx lps message guide 13-3 no font memory available. All banks of font memory appear not to be functional or to have suffered data loss. Action none. No graphics memory. All banks of graphics memory appear to be missing or have failed ...

  • Page 244

    System verification error messages 13-4 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 245: 14.

    Xerox docuprint 96/docuprint 96mx lps message guide 14-1 14. 14 summary sheet error messages your docuprint 96/docuprint 96mx lps communicates interpress error messages to you on the system controller display and on summary sheets that accompany your printed output. Summary sheets are placed at the ...

  • Page 246

    Summary sheet error messages 14-2 xerox docuprint 96/docuprint 96mx lps message guide your docuprint 96/docuprint 96mx lps operations reference chapter on hip-accessed communicating modes. Note: in the meaning/action column of this chapter, the term operand refers to that which is acted upon (i.E., ...

  • Page 247

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-3 feature requires rip option; diagonal lines. Diagonal lines can be drawn only with the raster image processor (rip) option. Action none. Feature requires rip option; graphic figures/lines. The operations are only s...

  • Page 248

    Summary sheet error messages 14-4 xerox docuprint 96/docuprint 96mx lps message guide overlapping form copy ranges on one page. Multiple forms per page were requested and the lps does not have the raster image processor (rip) option. Action 1. Merge the multiple forms into a single fsl. 2. Reference...

  • Page 249

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-5 appearance warning messages appearance warning: appearance warning: image off paper on page n at , [inches];, {cm]. Lines(s) not printed. One or more lines of text extended beyond the clipping region and, as a resu...

  • Page 250

    Summary sheet error messages 14-6 xerox docuprint 96/docuprint 96mx lps message guide font “interpressfontname” substituted for "interpressfontname." the default font family has been substituted for the requested font family. Action none. Further “...Substituting point size dd ...” messages suppress...

  • Page 251

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-7 master error (page n): problem with insert file; invalid file folder: “file-type”. An sif requested a file folder (type) not accessible from an interpress master. The valid folders are frm, img, lgo, lib, spl, and ...

  • Page 252

    Summary sheet error messages 14-8 xerox docuprint 96/docuprint 96mx lps message guide specified color not implemented. The colors available in the publication set cannot be used for text or pixel arrays if the raster image processor (rip) option is not supported. Action none. String off paper on pag...

  • Page 253

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-9 fatal error messages fatal error: incorrect size for jobaccount name; the size must be between 1 and 31 characters inclusive. The jobaccount name taken from the document exceeded the length of the allowable range. ...

  • Page 254

    Summary sheet error messages 14-10 xerox docuprint 96/docuprint 96mx lps message guide insufficient disk space for image file when reading an image from raster image processor (rip), a full system disk condition occurred. Action actionpurge unnecessary files from the lps and compress the system disk...

  • Page 255

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-11 operator requested job abort. The abort i command terminated document processing at the end of the current page. Action none. Page too complicated; too many fonts+forms+operators text+graphics. The page is too com...

  • Page 256

    Summary sheet error messages 14-12 xerox docuprint 96/docuprint 96mx lps message guide unexpected disk error creating temporary file filetype>filename. An error was found while writing to the system disk. The system disk has one or more bad sectors which are not in the bad block file. Action 1. Rese...

  • Page 257

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-13 informational messages informational messages character nb is not in font “filetype>localfontname”, set nb. This message identifies character references beyond the last character, highest character code, in an lps...

  • Page 258

    Summary sheet error messages 14-14 xerox docuprint 96/docuprint 96mx lps message guide document printing terminated due to error(s). The job was ended because of a previous error on the summary sheet. This message is added to the actual error message. Action none. Error sheet only; document not prin...

  • Page 259

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-15 substituting n point (rotated n degrees) characters. The desired point size was not satisfied and the next smaller (or next larger if there is no next smaller) point size is substituted. This message follows the ....

  • Page 260

    Summary sheet error messages 14-16 xerox docuprint 96/docuprint 96mx lps message guide master error messages master error (page n): disk problem with insert file: “filetype>filename.” an error was found while reading the system disk. The system disk has one or more bad sectors which are not in the b...

  • Page 261

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-17 font problem; font “interpressfontname” unknown. The default family name, as specified in the font profile or ipfnts.Jsl, does not have a mapping to lps fonts defined for the identified family. Action key in ifu a...

  • Page 262

    Summary sheet error messages 14-18 xerox docuprint 96/docuprint 96mx lps message guide form problem; form/job paper size mismatch: “filetype>localformname.” the form file identified was compiled with a paper size which does not match page n’s paper size. Action 1. Change the form referenced in the d...

  • Page 263

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-19 master not well-formed; bad document header. The interpress header, “interpress/xerox/n.0...” was not found in a file that required one. The file is either the interpress master or an sif. A sif problem is precede...

  • Page 264

    Summary sheet error messages 14-20 xerox docuprint 96/docuprint 96mx lps message guide parse failure; illegal operator ordering; nested correct bodies not allowed. The interpress master has a correct body beginning before the current body is complete. Action none. Parse failure; invalid parsing cont...

  • Page 265

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-21 parse failure; unrecognized operator: when processing a form, a form file with an invalid format was found. Action recompile the form’s fsl. Problem with insert file; invalid file folder: “filetype.” an sif reques...

  • Page 266

    Summary sheet error messages 14-22 xerox docuprint 96/docuprint 96mx lps message guide master warning messages master warning (page n): processing nested too deep. Nesting of interpress bodies exceeds the program stack space of the decomposer. Action none. Too many “page warnings” on this page. Too ...

  • Page 267

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-23 system problem messages system problem: accounting initialization failure. A problem processing the accounting information was found. Action none. Can not record errors; “sys>rtxfil” missing resysgen. The file tha...

  • Page 268

    Summary sheet error messages 14-24 xerox docuprint 96/docuprint 96mx lps message guide disk error recording errors; all messages lost. An error was found while reading the system disk. The system disk has one or more bad sectors which are not included in the bad block file. Action 1. Rename rtxfil.S...

  • Page 269

    Summary sheet error messages xerox docuprint 96/docuprint 96mx lps message guide 14-25 unrecoverable disk error reading “sys>ipfnts”; recompile “jsl>ipfnts.” an error was found while reading the system disk. The system disk contains one or more bad sectors that are not in the bad block file. Action ...

  • Page 270

    Summary sheet error messages 14-26 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 271: 15.

    Xerox docuprint 96/docuprint 96mx lps message guide 15-1 15. 15 docuprint 96/docuprint 96mx lps additional messages these messages may appear on your docuprint 96/docuprint 96mx lps pc user interface (pc ui). How the messages are organized messages that appear on your screen with numbers in front of...

  • Page 272

    Docuprint 96/docuprint 96mx lps additional messages 15-2 xerox docuprint 96/docuprint 96mx lps message guide general action to take as a general rule, when an error message is displayed in a message window on your docuprint 96/docuprint 96mx pc user interface, the recommended actions are as follows:...

  • Page 273

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-3 numbered docuprint 96/docuprint 96mx lps messages messages 7 through 36 messages 7 through 36 appear when serious user interface software problems occur. For all of these messages, call for x...

  • Page 274

    Docuprint 96/docuprint 96mx lps additional messages 15-4 xerox docuprint 96/docuprint 96mx lps message guide 544 signal expected but not received the pc user interface was expecting to receive signal data. Action select the ok header button to retry the process. If the problem persists, call xerox c...

  • Page 275

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-5 552 can’t post sm_comm message posting of the sm_comm message to the application’s queue failed. The communication with the system controller has not been initiated. Action 1. Ensure no other...

  • Page 276

    Docuprint 96/docuprint 96mx lps additional messages 15-6 xerox docuprint 96/docuprint 96mx lps message guide 559 data set ready timeout the data set ready timeout has been exceeded. Action select the ok header button to retry the process. If the problem persists, call xerox customer service. 560 fra...

  • Page 277

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-7 567 parity error while receiving the user interface does not use this feature of rs232. Action select the ok header button to retry the process. If the problem persists, call xerox customer s...

  • Page 278

    Docuprint 96/docuprint 96mx lps additional messages 15-8 xerox docuprint 96/docuprint 96mx lps message guide 574 invalid custom signal data the format of this system controller signal is invalid. Action select the ok header button to retry the process. If the problem persists, call xerox customer se...

  • Page 279

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-9 1545 invalid mouse speed rate an incorrect mouse speed was specified. Action select the ok header button to retry the process. If the problem persists, call xerox customer service. 1546 missi...

  • Page 280

    Docuprint 96/docuprint 96mx lps additional messages 15-10 xerox docuprint 96/docuprint 96mx lps message guide 1554 invalid comm device; must be 1 or 2 the parameter value of the “device” statement in the sysui configuration file is invalid. Action select the ok header button to retry the process. If...

  • Page 281

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-11 1561 cannot create ui dirty file; ui cannot run ms-dos cannot create a sysui dirty file. Action select the ok header button to retry the process. If the problem persists, call xerox customer...

  • Page 282

    Docuprint 96/docuprint 96mx lps additional messages 15-12 xerox docuprint 96/docuprint 96mx lps message guide 1568 no record types specified for console log report the parameters of the optional “reptype” statement in the sysui configuration file are missing. Action select the ok header button to re...

  • Page 283

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-13 3539 creation of console log file failed 3540 read console log file header failed 3541 write console log file header failed 3542 reset console log file header failed for message numbers 3539...

  • Page 284

    Docuprint 96/docuprint 96mx lps additional messages 15-14 xerox docuprint 96/docuprint 96mx lps message guide 3553 console log file wrap failed console log record could not be wrapped on disk due to hardware considerations. Action 1. Check disk drive to ensure that console log disk is inserted in di...

  • Page 285

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-15 3578 a console log is being formatted for printing formatting of a console log in preparation for printing is currently in progress. Informational message. No action required. Action none. 3...

  • Page 286

    Docuprint 96/docuprint 96mx lps additional messages 15-16 xerox docuprint 96/docuprint 96mx lps message guide 4137 through 4145 these messages relate to the loading of the symbol table, which contains object and data variable information for action processing. Select the ok header button to retry th...

  • Page 287

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-17 9041 invalid access request code the calling program has requested an invalid ddb (dialog data base) operation. Action select the ok header button to retry the process. If the problem persis...

  • Page 288

    Docuprint 96/docuprint 96mx lps additional messages 15-18 xerox docuprint 96/docuprint 96mx lps message guide 9049 not a maintenance file the ddb (dialog data base) data file is being used in the wrong mode. Action select the ok header button to retry the process. If the problem persists, contact xe...

  • Page 289

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-19 9060 no data file on re-open error intermediate ddb (dialog data base) data file not found. The missing file may represent the results of one or more previous steps in the process of the pro...

  • Page 290

    Docuprint 96/docuprint 96mx lps additional messages 15-20 xerox docuprint 96/docuprint 96mx lps message guide 9537 can’t allocate memory general pc user interface memory allocation failure. Call to microsoft windows globalalloc has (or would have) failed. Action 1. Ensure no other microsoft windows ...

  • Page 291

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-21 a boundary must be selected for 0 reams. The 0 reams option has been selected in the bin full criteria window. Action select a separation boundary (set, report, or job) in the bin full crite...

  • Page 292

    Docuprint 96/docuprint 96mx lps additional messages 15-22 xerox docuprint 96/docuprint 96mx lps message guide attempting completion but no completion phase record exists. Following the end of report printing, the phase manager cannot find a phase record to manage the completion of the audit log. Act...

  • Page 293

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-23 aud file mgr extended file not found. Tbd action if the problem persists, call xerox customer service. Aud file mgr file access denied due to read only mode or owner name. Aud file mgr file ...

  • Page 294

    Docuprint 96/docuprint 96mx lps additional messages 15-24 xerox docuprint 96/docuprint 96mx lps message guide aud file mgr file not found. Tbd action if the problem persists, call xerox customer service. Aud file mgr file not open. Tbd action if the problem persists, call xerox customer service. Aud...

  • Page 295

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-25 aud file mgr lock error. Tbd action if the problem persists, call xerox customer service. Aud file mgr operation not allowed at this time. Tbd action if the problem persists, call xerox cust...

  • Page 296

    Docuprint 96/docuprint 96mx lps additional messages 15-26 xerox docuprint 96/docuprint 96mx lps message guide aud file mgr rejected # of records specified in reject count for extended get/step. Tbd action if the problem persists, call xerox customer service. Aud file mgr supplemental index damaged. ...

  • Page 297

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-27 audit log formatting - no files selected. The criteria selected in the audit log print options or audit log job options window are not met. This applies to the ’jobs’ option only. Action sel...

  • Page 298

    Docuprint 96/docuprint 96mx lps additional messages 15-28 xerox docuprint 96/docuprint 96mx lps message guide btext date parameter exceeds 365 days. The number of days specified in the btext ldt parameter is too large. Action check jsl or djde in job stream to ensure that all btext ldt keywords and ...

  • Page 299

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-29 cannot access memory for report format buffer. Report format buffer does not exist. Action if the problem persists, call xerox customer service. Cannot allocate memory for format list. Insuf...

  • Page 300

    Docuprint 96/docuprint 96mx lps additional messages 15-30 xerox docuprint 96/docuprint 96mx lps message guide cannot allocate memory for report phase record during crash recovery. Insufficient windows resources to allocate a report phase record to support crash recovery. Action if the problem persis...

  • Page 301

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-31 cannot use reserved words in file names. The words con, clock$, aux, com(1-4), lpt(1-4), nul, and prn are recognized by the pc user interface as dos commands and therefore cannot be used in ...

  • Page 302

    Docuprint 96/docuprint 96mx lps additional messages 15-32 xerox docuprint 96/docuprint 96mx lps message guide completed reports not finished transferring from in-process log. Exit to dos has been erroneously enabled and selected. No loss of data should occur as the transfer process will continue whe...

  • Page 303

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-33 empty delete list. Dialog has requested that an audit log be deleted but has not provided a report name or job number. Action if the problem persists, call xerox customer service. Empty form...

  • Page 304

    Docuprint 96/docuprint 96mx lps additional messages 15-34 xerox docuprint 96/docuprint 96mx lps message guide error extending aud file mgr file. Tbd action if the problem persists, call xerox customer service. Error opening report format output file. The record manager is unable to open the output f...

  • Page 305

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-35 expanded memory manager reports error to btreive. Tbd action if the problem persists, call xerox customer service. Extended get/step operations have exceeded pre-image buffer. Tbd action if ...

  • Page 306

    Docuprint 96/docuprint 96mx lps additional messages 15-36 xerox docuprint 96/docuprint 96mx lps message guide failure to create ddl window for auditor. This could occur during pc ui session startup. Windows has failed to allow the auditor feature to create a window. Action if the problem persists, c...

  • Page 307

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-37 failure to stop aud file mgr. This may occur when the exit to dos option is selected from the system control or utilities menu. The file manager used for auditing has failed to properly term...

  • Page 308

    Docuprint 96/docuprint 96mx lps additional messages 15-38 xerox docuprint 96/docuprint 96mx lps message guide fcg exiting: invalid profile—output or input not specified the profile requires out135 prior to parameter 1 to determine if these values are to be used for an output profile. If out135 has n...

  • Page 309

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-39 file could not be found. Ensure that the file name is valid. An incorrect file name may have been entered, or the file name does not exist. Action 1. Check the file listing of the window you...

  • Page 310

    Docuprint 96/docuprint 96mx lps additional messages 15-40 xerox docuprint 96/docuprint 96mx lps message guide filter file read / open error. One of the filter files cannot be opened. Action if the problem persists, call xerox customer service. Filter limit reached by extended get/next operation. Tbd...

  • Page 311

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-41 in-process record read is not log header. The expected audit log header record was not read from the audit log in-process file. Action if the problem persists, call xerox customer service. I...

  • Page 312

    Docuprint 96/docuprint 96mx lps additional messages 15-42 xerox docuprint 96/docuprint 96mx lps message guide invalid aud file mgr op code. Tbd action if the problem persists, call xerox customer service. Invalid audit log data request parameter. The auditor is using an invalid parameter to request ...

  • Page 313

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-43 invalid key type when creating or extending file. Tbd action if the problem persists, call xerox customer service. Invalid mix of single/multiple record locks. Tbd action if the problem pers...

  • Page 314

    Docuprint 96/docuprint 96mx lps additional messages 15-44 xerox docuprint 96/docuprint 96mx lps message guide invalid parameter - fposl command. An fposl command has an invalid parameter. The report definition file may be corrupt. Action if the problem persists, call xerox customer service. Invalid ...

  • Page 315

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-45 invalid parameter - plines command. A plines command has an invalid parameter. The report definition file may be corrupt. Action if the problem persists, call xerox customer service. Invalid...

  • Page 316

    Docuprint 96/docuprint 96mx lps additional messages 15-46 xerox docuprint 96/docuprint 96mx lps message guide invalid response for btext nse number of sheets expected parameter. The number of sheets expected parameter is incorrectly specified. Action check jsl or djde in the job stream to ensure tha...

  • Page 317

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-47 key not found reading in-process file for completion copy. An expected key value in the in-process file was not found while copying records from the file. Action if the problem persists, cal...

  • Page 318

    Docuprint 96/docuprint 96mx lps additional messages 15-48 xerox docuprint 96/docuprint 96mx lps message guide log xxx is unreadable and cannot be (emptied/deleted/printed/ displayed/saved). If the problem persists, call for service. The saved console log cannot be read and no action can be performed...

  • Page 319

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-49 no master directory file found. Attempting to list audit logs, but no master directory is found. This condition exists if no audit logging has been performed. Action if the problem persists,...

  • Page 320

    Docuprint 96/docuprint 96mx lps additional messages 15-50 xerox docuprint 96/docuprint 96mx lps message guide number of accelerated files exceeds number of available aud file mgr buffers. Action if the problem persists, call xerox customer service. Pag btext signal received before rpt btext signal. ...

  • Page 321

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-51 read error during save. The record manager has detected a read error during an audit log save operation. Action if the problem persists, call xerox customer service. Report definition file r...

  • Page 322

    Docuprint 96/docuprint 96mx lps additional messages 15-52 xerox docuprint 96/docuprint 96mx lps message guide sor-input received out of sequence - already in input phase. A start of report signal has been received from the ess before an end of report signal for the preceding job. Action if the probl...

  • Page 323

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-53 the current log is unreadable and cannot be (emptied/deleted/ printed/displayed/saved). Call for service. The current console log is unreadable and no action can be performed on it. Action c...

  • Page 324

    Docuprint 96/docuprint 96mx lps additional messages 15-54 xerox docuprint 96/docuprint 96mx lps message guide the ui has reached its memory limit. All windows and menus are being closed to restore memory. The system is automatically closing windows and menus, in order to prevent the pc user interfac...

  • Page 325

    Docuprint 96/docuprint 96mx lps additional messages xerox docuprint 96/docuprint 96mx lps message guide 15-55 unable to write the file. Try again. The console log record could not be written to disk due to hardware consideration. The actions need to be repeated. Action none. Variable length portion ...

  • Page 326

    Docuprint 96/docuprint 96mx lps additional messages 15-56 xerox docuprint 96/docuprint 96mx lps message guide.

  • Page 327: Xerox Support Services

    Xerox docuprint 96/docuprint 96mx lps message guide a-1 a. A xerox support services xerox support services are there to help you if your laser printing system should develop a severe hardware, software, or applications problem. If a problem continues after you have tried all remedial actions suggest...

  • Page 328

    Xerox support services a-2 xerox docuprint 96/docuprint 96mx lps message guide xerox customer service support center the xerox customer service support center is available to address your software- or hardware-related problems, such as continuous paper jams or poor print quality, if the corrective a...

  • Page 329: Glossary

    Xerox docuprint 96/docuprint 96mx lps message guide glossary-1 glossary a3 paper size measuring 297 by 420 mm. A4 paper size measuring 210 by 297 mm. Abort to terminate the printing of a job or execution of a program before it completes. Algorithm computational procedure that can be repeated any num...

  • Page 330

    Glossary glossary-2 xerox docuprint 96/docuprint 96mx lps message guide background job low-priority job, usually batched, that is executed automatically as system resources become available. Backup file file copied to a storage medium for safekeeping in case the original is damaged or lost. Band rec...

  • Page 331

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-3 blocking process of combining two or more records into a single block of data which can then be moved, operated upon, or stored, as a single unit by the computer. Block length number of characters or bytes contained in a block o...

  • Page 332

    Glossary glossary-4 xerox docuprint 96/docuprint 96mx lps message guide character code identifier code associated with the universal identifier “xerox” to indicate the version of the xerox character code standard used to code interpress strings. Character set number of different characters used by a...

  • Page 333

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-5 communications ability of two devices to transmit information to each other. Compatibility characteristic of computer equipment permitting one device to use the same information or programs as another device without conversion o...

  • Page 334

    Glossary glossary-6 xerox docuprint 96/docuprint 96mx lps message guide cpu central processing unit. Interprets and executes instructions, performs all operations and calculations, and controls input and output units and auxiliary attachments. Data 1. In general, facts, numbers, letters, symbols, an...

  • Page 335

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-7 digitize to express or represent data in digital (binary) form so that it can be processed electronically. Disk drive device that can read or write magnetic media. Display viewing device (monitor) that visually communicates syst...

  • Page 336

    Glossary glossary-8 xerox docuprint 96/docuprint 96mx lps message guide extended metrics measurements used in interpress to alter the size of fonts, allowing more precision with character escapement. Used for rendered characters. Fcb forms control buffer. Buffer for controlling the vertical format o...

  • Page 337

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-9 format 1. Layout of a document, including margins, page length, line spacing, typeface, and so on. 2. In data storage, the way the surface of a disk is organized to store data. 3. To prepare the surface of a disk for acceptance ...

  • Page 338

    Glossary glossary-10 xerox docuprint 96/docuprint 96mx lps message guide hcs high-capacity stacker. Stacker bin capable of holding 2500 sheets of 20 pound/75 gsm paper. In the lps, the high-capacity stacker bins are located in the top half of the feeder/stacker modules. Hexadecimal numbering system ...

  • Page 339

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-11 interpolation series of logical rules implemented in the printer to convert a 300 spi input video stream to a 600 spi output video stream. Interpolation is functionally analogous to bit doubling (2x scaling), except the logical...

  • Page 340

    Glossary glossary-12 xerox docuprint 96/docuprint 96mx lps message guide landscape page orientation orientation of print lines or top of an illustration parallel to the long edge of the paper if the sheet is within the standard size range. (sheets larger than standard have the reverse print orientat...

  • Page 341

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-13 log collection of messages or message segments placed on an auxiliary storage device for accounting or data collection purposes. Logical page in the xerox printing systems environment, a formatted page that is smaller than the ...

  • Page 342

    Glossary glossary-14 xerox docuprint 96/docuprint 96mx lps message guide menu list of available functions, commands, and options. Message unit of information transmitted by one facility to another in a form that the receiving facility can understand and act upon. The standard message format consists...

  • Page 343

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-15 offset printing widely-used method of commercial and corporate printing, where ink is picked up by a metal or paper plate, passed to an offset drum, and then passed to the paper. Online devices under the direct control of a cen...

  • Page 344

    Glossary glossary-16 xerox docuprint 96/docuprint 96mx lps message guide page orientation direction in which data is printed on a report. See also landscape page orientation; portrait page orientation. Parameter part of a command, other than the keyword. See also keyword; operator command. Pass-thro...

  • Page 345

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-17 print file position of the system disk memory (up to 4 mb) received for temporary storage of formatted pages for printing. Pages are retained until they are delivered to the output tray. Printout informal expression referring t...

  • Page 346

    Glossary glossary-18 xerox docuprint 96/docuprint 96mx lps message guide record collection of data or words treated as a unit. Recovery act of overcoming a problem or error during processing. Typically, a specialized software recovery routine gains control and attempts to resolve the error without c...

  • Page 347

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-19 sequential in numeric sequence, usually in ascending order. As applied to a file organization, describes files in which records are written one after another and cannot be randomly accessed. For example, the first 99 records in...

  • Page 348

    Glossary glossary-20 xerox docuprint 96/docuprint 96mx lps message guide stock user-defined name in the jsl that specifies a certain type of paper for printing a job. See also cluster. Stockset collection of stocks to be used on a print job. See also stock; cluster. Storage retention of information....

  • Page 349

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-21 tab to move the cursor on a display or printer to a prespecified column on the display or paper, most often by using the key on a keyboard. Tape recording media for data or computer programs. Tape can be in permanent form, such...

  • Page 350

    Glossary glossary-22 xerox docuprint 96/docuprint 96mx lps message guide transaction processing method of data processing in which files are updated and results are generated immediately after data entry. Translation 1. In data communications, the conversion of one code to another on a character-by-...

  • Page 351

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-23 virtual page page area selected by a forms designer for printing. Warning message system-issued message indicating that an error has been encountered even though the program has not failed. Weight characteristic of type determi...

  • Page 352

    Glossary glossary-24 xerox docuprint 96/docuprint 96mx lps message guide bpi bits per inch bps bits per second bsc binary synchronous communications cd character dispatcher cdc control data communications cd/ig character dispatcher/image generator cm control module cme copy modification entry cpi ch...

  • Page 353

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-25 dte data terminal equipment ebcdic extended binary coded decimal interchange code enet ethernet network eot end of tape ep electronic publishing ess electronic subsystem, also referred to as the system controller fcb forms cont...

  • Page 354

    Glossary glossary-26 xerox docuprint 96/docuprint 96mx lps message guide hpos horizontal positioning ibm international business machines corporation ifu interpress font utility ig image generator igm image generator module i/o input/output iom image output module iot input output terminal, also refe...

  • Page 355

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-27 lf long-edge feed lpi lines per inch lps laser printing system mtu magnetic tape unit (refers to the 9-track magnetic tape drive; also referred to as “magnetic tape drive”) micr magnetic ink character recognition ocr optical ch...

  • Page 356

    Glossary glossary-28 xerox docuprint 96/docuprint 96mx lps message guide qic 1/4 inch cartridge ram random access memory ros raster output scanner safes stand-alone field engineering software san software analysis number sci start command index scsi small computer system interface sdlc synchronous d...

  • Page 357

    Glossary xerox docuprint 96/docuprint 96mx lps message guide glossary-29 vm virtual memory vpos vertical positioning vs virtual storage wan wide area network xcsc xerox customer support center xdgi xerox dcf and gddm interface xdss xerox documentation and software services xics xerox integrated comp...

  • Page 358

    Glossary glossary-30 xerox docuprint 96/docuprint 96mx lps message guide.