Xerox Phaser 2135 Advanced Features And Troubleshooting Manual - page 124

Advanced Features and Troubleshooting Manual

111

Networking

Printing the Configuration Page

It is important to print a Configuration Page from the printer to determine the current 

network settings of your Phaser 2135 printer. The default settings enable all ports, which 

are suitable for most applications. Refer to the page 18 for step-by-step instructions on 

printing a Configuration Page.

Note

If you change any settings, print another Configuration Page to verify that your 

changes were made.

Resetting the Printer 

To Reset your printer from the Front Panel:

1.

Press Menu Up or Menu Down until you see:

2.

Press Item Up or Item Down until you see:

3.

Press Value Up or Value Down until you see:

4.

Press Enter. You should see:

5.

Press On Line. You should see:

Menus

Job Menu

Job Menu

Restart Printer

Restart Printer

Yes

Job Menu

Restart Printer

Ready