Xerox Phaser 750DP User Manual - page 17

8

Phaser 750 Color Printer

Quick Collate 

Quick Collate

Requirements

■

DP or DX Feature Set 

■

Hard drive (internal)     

Quick Collate speeds the collation and printing of large print jobs and multiple sets of 

documents. The collate function in some software applications repeatedly sends each page 

in sequence to the printer until the requested number of copies is printed. With the Quick 

Collate option, the job is sent only once and then multiple collated sets are produced by 

the printer, allowing much faster processing time. 

The number of pages that can be collated at one time depends on the size of the hard disk 

installed in the printer. 

Note

Make sure that you turn off the collate function in your application, because the 

printer’s Quick Collate option is faster than the collate function in software 

applications.

In a supported driver, locate the Quick Collate option:

■

LaserWriter 8.3.4 driver: 

In the Print dialog box, click Options.   

■

LaserWriter 8.6 driver:

In the Print dialog box, from the pull-down menu (General) select Printer 

Specific Options.

■

Windows 95 / Windows 98 PostScript driver:

Start/Settings/Printers, then select Properties for your printer. In the Setup tab, 

select Advanced Paper Options. 

■

Windows 2000 driver:

From the Layout tab or Paper/Quality tab, click Advanced.   

■

Windows NT driver:

From the Properties tab, select the Advanced tab. From the Document Options 

tab, select Printer Features. 

■

Adobe PS3 driver for Windows 3.1:

Select the Features tab options. 

Quick Collate and 1st Page Preview

When you use the printer’s Quick Collate option with 1st Page Preview, only the first page 

of the first set is printed before pausing for your review.