Xerox Phaser 750DP User Manual - page 64
Advanced Features and Troubleshooting Manual
55
Troubleshooting Phaser 750 Printers
A single color shows a light, repeating horizontal line
■
To fix the problem:
■
Run 20-30 prints. The impression will disappear with continued time and use.
■
To avoid the problem:
■
Occasionally, or a day or two before installing a new Toner Cartridge, rotate the
gear on the end of the cartridge by at least a quarter turn.
Prints are missing fine-line detail
■
Replace the Imaging Unit.
Dark color spots and dark or light streaks appear in all colors
■
Replace the Imaging Unit; make sure that the old Imaging Unit is not exposed to light
for more than 3 minutes.
■
If a new Imaging Unit does not correct the problem:
■
Put the old Imaging Unit back into the printer.
■
Repack the new Imaging Unit.
■
Replace the Fuser.
Print shows a straight, thin and even, light vertical line in all colors
■
Replace the Imaging Unit.