Xerox Phaser 750DP User Manual - page 75

66

Phaser 750 Color Printer

Troubleshooting Phaser 750 Printers 

Media frequently wraps around the Fuser

■

Use Tektronix media for best results.

■

Do not use any media designed for inkjet printers, especially inkjet coated paper and 

inkjet transparencies. Inkjet media are coated with a substance that may damage the 

Fuser; Tektronix does not furnish service for damage or malfunction caused by the 

use of non-Tektronix supplies or consumables. Tektronix coated paper and 

transparencies have been specially designed for use with Tektronix Color Laser 

Printers.

■

Make sure that you use a high-quality laser paper: 60 - 90 g/m

2

 (16 - 24 lb.) paper in 

the media trays and 75 - 150 g/m

2

 (20 - 40 lb. Bond) paper with the Multi-Purpose 

Tray.

■

Replace the Fuser Roll.

Off-set images

■

Check your application for correct image sizing.

Cut-off images

■

Check your application for image sizing.

■

Make sure that you are using the correct PPD file and have selected the correct 

page size. 

■

Make sure that the correct size media is in the media tray.