Xerox WORKCENTRE C2424 Maintenance Manual

Maintenance

WorkCentre® C2424 Copier-Printer

7-31

Maintenance

This section includes:

■

"Adding Ink" on page 7-32

■

"Emptying the Waste Tray" on page 7-36

■

"Replacing the Maintenance Kit" on page 7-39

■

"Cleaning the Paper Release Blade" on page 7-41

■

"Cleaning the Maintenance Kit Wiper Blade" on page 7-45

■

"Cleaning the Outside of the System" on page 7-47

■

"Cleaning the Document Glass and Document Feeder" on page 7-47

For safety information, see 

Appendix A

 of this guide.

Your system needs little maintenance to keep it producing quality prints. Besides adding ink, 

you will eventually need to replace the maintenance kit. Order an extra maintenance kit 

(standard capacity or extended capacity) when the control panel displays a warning that the 

maintenance kit is nearing the end of its life. You must replace the kit when the control panel 

displays an error message to replace the maintenance kit. 

To view the life remaining and installation date of the maintenance kit:

1.

On the control panel, press the System Setup button.

2.

In the menu, select 

Information

, then press the Enter button.

3.

Select 

Supplies Info

, then press the Enter button.

4.

Select 

Maintenance Kit Life

, then press the Enter button.

For information about supplies, go to 

www.xerox.com/office/c2424supplies

. Each supply 

includes installation instructions with the packaging.