Yamaha LS9 Editor Quick Start Manual - Recall Safe

Recall Safe

The Recall Safe function allows you to specify parameters and/or channels that are not to be recalled when a scene is 

recalled  The Recall Safe function applies to all scenes, including scene 000

● Recall Safe for Individual Channels (Preventing Recall of Specified Channels)

Press the CHANNEL JOB key as many times as necessary until the RECALL SAFE display appears  Then after engaging 

the [SEL] of the target channel, use the SAFE buttons in the SAFE PARAMETER field at the bottom of the display to specify 

the parameters you don not want to be recalled  If you engage the SET BY SEL button while the RECALL SAFE display is 

showing, you can turn Recall Safe on for any channel simply by pressing it’s [SEL] key

● Recall Safe for Specified Parameters Within Individual Channels

    (Preventing recall of Specified Parameters)

You can, for example, specify that the EQ settings for a guitar channel are not to be 

changed when a different scene is recalled  This is known as “Partial Safe ”

Select specific parameters for Recall Safe by using the SAFE PARAMETER field 

buttons (any button other than [ALL] = Partial Safe), and engage the SAFE button 

in the same was as when specifying channel Recall Safe  A number of Partial Safe 

options are available  To specify the same parameter in all channels, engage the 

APPLY TO ALL INPUT or APPLY TO ALL OUTPUT button before selecting the 

parameter

1

The GLOBAL field allows you to select global 

parameters (parameters that apply to the entire 

console, rather than individual channels). These 

parameters can be edited even after they have been 

assigned Recall Safe status. Parameters that are 

highlighted in green are Recall Safe parameters, 

while parameters that appear in black are recallable 

parameters.

CLEAR ALL Button

GLOBAL Field

CH RECALL SAFE Field

APPLY TO ALL INPUT Button/

APPLY TO ALL OUTPUT Button

Recall Safe channels are highlighted in green.

Recall Safe

< MATRIX Channels >

< MIX Channels >

< Input Channels >

Partial Safe Menu (Input Channel)

< STEREO/MONO Channels >

(Output Channels)

Partial Safe channels are highlighted in blue.

SAFE PARAMETER Field