Yamaha LS9 Editor Quick Start Manual - Geq Selection and Editing

9

GEQ Selection and Editing

If you position the cursor at a mounted GEQ unit in the VIRTUAL RACK GEQ/EFFECT display and press the [ENTER] 

key, the GEQ pop-up window will open

The  channel 

faders on the 

LS9- cover 

all 1 EQ bands 

at once. The 

LS9-16 has three 

buttons that 

select the range 

of bands that 

will be controlled 

by the channel 

faders.

You can switch between different GEQ units by repeatedly 

pressing the RACK [1-4] or [5-8] button. Flex15 GEQ units can 

be selected and edited in the same way. When a Flex15 GEQ 

unit is being edited the number of remaining available bands will 

be displayed.

Although you can boost and cut the EQ bands via the display, you can also use the channel faders to directly control the 

corresponding bands  Position the cursor at a button in the FADER ASSIGN area at the bottom of the display and press the 

[ENTER] key  The channel faders will move to the corresponding settings as soon as a FADER ASSIGN button is engaged (the 

button will be highlighted), and the faders can be used to boost/cut the corresponding EQ bands

Links the faders to EQ control.

The [ON] keys 

above the 

faders set the 

corresponding 

band to it’s “0” 

setting.

Click the FLAT button to reset all bands to 

their “0” settings.