Yamaha LS9 Editor Quick Start Manual - User Defined Key Assignment
USER DEFINED KEY Assignment
The LS9 has 12 USER DEFINED KEYS to which you can freely assign a range of functions, allowing you to execute the
assigned functions by simply pressing the corresponding keys The USER ASSIGNED KEYS are initially assigned to default
functions, but you can change these assignments as required via the SETUP page You could, for example, assign USB
memory recording and playback to the USER DEFINED KEYS so you can instantly begin recording or playback at any time
Of you could assign a HELP file for fast, easy reference.
To “bookmark” a specific display page, select
“PAGE CHANGE” in the FUNCTION field, and then
“PAGE BOOKMARK” in the PARAMETER 1 field.
In the example above we’ve assigned a display page to be opened when the corresponding USER DEFINED KEY is pressed
The display page to be opened is actually specified by pressing and holding the USER DEFINED KEY for more than 2
seconds while the target display page is showing Once assigned, you can instantly open the assigned display page from any
other page by simple pressing the USER DEFINED KEY
() To change the function assigned to a key, press
a USER DEFINED KEY and the corresponding
USER DEFINED KEY SETUP pop-up window will
appear.
(4) Make sure that the FUNCTION field is
highlighted with a yellow frame, then use the
dial or DEC/INC keys to select the function you
want to assign from the list. The functions are
organized by category, and you can select the
target parameter from either the PARAMETER 1 or
PARAMETER field.
● USER DEFINED KEY Assignment Procedure
(1) Press the SETUP key in the
DISPLAY ACCESS section as
many times as necessary until the
USER SETUP display appears.
() Position the cursor at the USER DEFINED
KEYS button and press the ENTER key. The USER
DEFINED KEYS pop-up window will open showing
the current key assignments.
14