3Com VCX V7000 Manager's Manual - page 20
20
C
HAPTER
2: VCX V7000 M
ANAGER
’
S
T
ELEPHONE
— M
ODEL
3103
Access buttons have these default settings:
1 Do Not Disturb — Enables the Do Not Disturb feature. See
2 Call Forward — Allows you to forward calls to different destinations.
See
.
3 Call Park — Allows you to place a call in a “holding pattern” and retrieve
it from any other telephone in the system. See
4 Personal Speed Dial 1 — See
5 Personal Speed Dial 2
6 Personal Speed Dial 3
7 Personal Speed Dial 4
8 Personal Speed Dial 5
Status Lights for
Access Buttons
An Access button that is set up for incoming and outgoing calls indicates
the status, as shown in
Table 3 Status Lights for Access Buttons
If the light is
The line is
Off
Available for use
Steady
In use
Feature Options
Your Manager’s phone provides a full range of features. You can access
some of these features (for example, call transfer) by pressing a dedicated
button. These features, and basic phone operations such as making and
answering calls, are described in
You can access some Manager’s phone features by pressing the Features
soft button, as shown in
. You can then enable a feature using
either of the following methods:
1 Press the Features soft button.
2 Enter the three-digit feature code on the keypad (see
).
3 Enter any additional values following display panel prompts.