3Com VCX V7000 Manager's Manual - page 97

Personal Speed Dial Access Buttons

97

enabled, the parked call is forwarded to the call coverage point 

configured for that phone.

Call Pickup and Bridged Line Calls

Call Pickup (both Directed and Group) allows a user to answer a call that 

is ringing on another telephone. 

For bridged calls, you enter the Call Pickup feature code (455 for 

Directed) followed by the group security code and the extension of a 

primary phone. The call stops ringing on all primary and secondary 

phones when the call is picked up. You cannot enter the extension of a 

secondary phone. Doing so returns an error, and the call keeps ringing on 

all primary and secondary phones.

Attendant Console and Bridged Line Calls

The VCX administrator can map primary phone numbers and secondary 

phone numbers to buttons on a VCX 3105 Attendant Console. In this 

case, status lights on the Attendant Console show that the bridged line is 

in use for primary and secondary phones.

Hunt Groups and Bridged Line Calls

A primary or a secondary phone can belong to a hunt group. 

If a primary phone is a member of a hunt group, a call coming to the 

hunt group rings on an SA line on the primary phone. A secondary phone 

cannot receive a hunt group call directed to a primary phone. 

Message Waiting Indication and Bridged Line Calls

A secondary phone displays the Message Waiting Indication (MWI) of the 

primary phone (or phones).  

Pressing the MSG button lists the mailboxes. You can press Up and Down 

arrow keys to select a mailbox, then press the MSG button again to 

connect to that mailbox.

Personal Speed Dial 

Access Buttons

The VCX User Interface allows you to set up personal speed dial access 

buttons using two method; by assigning the Personal Speed Dial 

feature to an access button and by assigning the Call feature to an access 

button.