3Com VCX V7000 Manager's Manual - page 81

Emergency Phone Number Dialing Service

81

Use the up and down scroll buttons to navigate through the hunt group 

list. The first line displays the name and number of the hunt group. The 

second line displays your current status. 

■

Press Change soft button below the Display Panel to change your 

current login status. 

■

Press Exit soft button below the Display Panel to exit from the hunt 

group display. 

When you change your login status, the Display Panel shows 

HuntGroup 

Login Enabled

. If you are logged into multiple phones using the same 

phone number, this message appears on all phone displays. While this 

message appears in the Display Panel, press Feature + 972 to display the 

hunt group list.

You can also use the VCX User Interface to view the hunt groups you 

belong to and your current login status for each group.

If a hunt group member has a remote phone, that remote phone will not 

appear in the VCX User Interface Hunt Group Membership list, but it does 

appear in the administrator’s Hunt Group Membership list.

Emergency Phone 

Number Dialing 

Service

VCX phones provide the capability to dial an emergency phone number 

even when the phone is not logged in to a VCX system. The phone must 

be properly configured, connected to an operational VCX system, and the 

region must support this service. If the VCX system is not operational, an 

emergency call can be routed (optionally) directly through a PSTN media 

gateway. Contact your system administrator to determine the appropriate 

emergency number for your region.