3D Systems CUBE User manual - page 52

48

3D Systems, Inc

.

PRINT SETTINGS

Print Settings allow you to set the parameters of your print and build them into your print file. There are four (4) different options for 

setting the print parameters .

Custom:

Allows you to set the layer thickness, density, and fill pattern. You may also enable or disable supports and rafts.

Standard: A strong print that does not require fine details.

Premium: A strong print that requires fine details.

Draft:

A print that does not require strength or fine details.

Layers

• 

0 .070 mm

High quality prints

• 

0 .200 mm

Shorter print time

Density

• 

Hollow

Short print times and low material use

• 

Strong

Stronger prints

• 

Almost Solid

High material use and almost solid prints

Fill Pattern

• 

Honeycomb

Used for strong prints

• 

Diamonds

For general printing

• 

Lines

Shorter print time

Supports

• 

Supports are structures that are automatically printed under overhanging 

parts of your model .

Raft

• 

Rafts are printed during the first few layers to help the model adhere to the 

print pad .