3D Systems CUBE User manual - page 77
73
3D Systems, Inc
.
A
4 . When prompted, remove the right side cartridge . Select the
checkmark
to continue .
NOTE: Press the two cartridge tabs inward to release the cartridge
from the printer .
CAUTION: The cartridge must be removed first before proceeding.
Attempting to remove the print jet before being prompted to do so
will damage the cartridge .
5 . Rotate the cartridge print jet counter-clockwise and remove the print jet from the
printer . Select the
checkmark
to continue .
6 . Insert the cartridge print jet from the replacement cartridge into the print jet
opening on top of the printer .
7 . Rotate the cable clockwise until the dots (A) align . Select the
checkmark
to
continue .
NOTE: As the print jet is rotating, ensure the print jet tube is
tucked under the top of the printer cover .
8 . Mount the new cartridge to the right side of the printer . Select the
checkmark
to
continue .
NOTE: Ensure the print jet tube is tucked under the top of the
printer cover .