3D Systems CUBE User manual - page 99
Other manuals for CUBE:
User Manual, Quick Start Manual, Quick Start Manual, User Manual, User Manual
Manual is about: Personal 3D Printer 3rd Generation
of
102
95
3D Systems, Inc
.
5 . Carefully lift the print platform (A) and tape the spacer (B) to the printer in the
location shown .
6 . Remove the print pad from the printer .
7 . Place the lower insert on top of the print pad and fold the sides outward .
8 . Move the print jet mount to the center of the printer and place the top insert over
the mount .
NOTE: The top insert is designed to keep the sides of the lower
insert pressed outward .
9 . Place the printer in the protective bag and then place it in the lower foam support
in the box .
A
B