3D Systems CUBE User manual - page 93
Other manuals for CUBE:
User Manual, Quick Start Manual, Quick Start Manual, User Manual, User Manual
Manual is about: Personal 3D Printer 3rd Generation
of
102
89
3D Systems, Inc
.
UPDATING THE CUBE FIRMWARE
The printer firmware can either be updated via wireless connection or by using a USB mass storage device.
NOTE: Whenever a firmware update is performed, you must perform the Auto Level procedure and then the Auto
Gap procedure .
Updating Firmware Using Wi-Fi
1 . Select
SETUP
.
2 . Navigate to the
System 3
screen and select
FIRMWARE
.
3 . Select
WIFI
.
NOTE: The printer will attempt to connect to the server .