3D Systems CUBE User manual - page 76
Other manuals for CUBE:
User Manual, Quick Start Manual, Quick Start Manual, User Manual, User Manual
Manual is about: Personal 3D Printer 3rd Generation
of
102
72
3D Systems, Inc
.
REPLACING A MATERIAL CARTRIDGE
Caution: Material cartridges should only be replaced by performing the following procedure . Replacing the
cartridge without using the printer menu can damage the printer and print jets and void the manufacturer’s
warranty .
1 . Select
SETUP
.
2 . Select
CHANGE CARTRIDGE
.
3 . Select the material cartridge to change .
NOTE: This procedure illustrates changing the right cartridge . The
same concept applies to the left side .
NOTE: The print jet will begin to heat .