3D Systems CUBE User manual - page 84
Other manuals for CUBE:
User Manual, Quick Start Manual, Quick Start Manual, User Manual, User Manual
Manual is about: Personal 3D Printer 3rd Generation
of
102
80
3D Systems, Inc
.
2 . Pull the jet wiper (A) upward .
3 . Install the new jet wiper onto the purge bin and reinstall the purge bin assembly
into the printer .
NOTE: Ensure the jet wiper is fully seated before reinstalling the
purge bin assembly .
4 . Select the
checkmark
to confirm the replacement of the jet wiper.
A