3D Systems CUBE User manual - page 72
Other manuals for CUBE:
User Manual, Quick Start Manual, Quick Start Manual, User Manual, User Manual
Manual is about: Personal 3D Printer 3rd Generation
of
102
68
3D Systems, Inc
.
6 . Apply two thin layers of Cube Glue to the print pad . Select the
checkmark
to
continue .
NOTE: For best results, allow the glue to dry before printing .
NOTE: To ensure proper adhesion, the glue area should be larger
than the base of your printed creation .
NOTE: The print jets will heat to operating temperature .
NOTE: The printer will begin to print .
7 . When the printer has finished printing, select the
checkmark
to go to the main
menu .
NOTE: Follow the steps in the section titled
Finishing Your Creation
.