ABB i-bus KNX Product Manual - page 20
Other manuals for i-bus KNX:
Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual
Manual is about: Room temperature controller
of
60
ABB i-bus
KNX
Commissioning
18 2CDC 508 101 D0201 | VAA/S x.230.2.1
3.1.1 Conversion
For ABB i-bus
®
KNX devices from ETS3 or higher, it is possible to assume the parameter settings and
group addresses from earlier application program versions.
Furthermore, conversion can be applied to transfer the existing parameterization of a device to another
device.
Note
When the term “channels” is used in the ETS, inputs and/or outputs are meant. In order to ensure that
the ETS language generally applies for as many ABB i-bus
®
devices as possible, the word channels is
used here.