ABB i-bus KNX Product Manual - page 21
Other manuals for i-bus KNX:
Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual, Product Manual
Manual is about: Room temperature controller
of
60
ABB i-bus
KNX
Commissioning
VAA/S x.230.2.1 | 2CDC 508 101 D0201 19
3.1.1.1
Procedure
Insert the required device into the project.
Import the current application program into the ETS.
Perform
parameterization
and program the device.
After you have parameterized a device, you can transfer the settings to a second device.
Right click on the product and select Plug-in > Convert in the context menu for this purpose.
Thereafter undertake the required settings in the Convert dialog.
Finally, exchange the physical address and delete the old device.
Should you wish to only copy individual channels within a device, use the function
,
page 21.