ABB i-bus KNX Product Manual - page 35
ABB i-bus
KNX
Commissioning
VAA/S x.230.2.1 | 2CDC 508 101 D0201 33
3.2.4 Parameter
window
A: Functions
Functions
, various functions for each output can be activated.
Enable communication object
"Block" 1 bit
Options: no
yes
yes:
The 1 bit communication object
, page 44, is enabled. The following parameter appears:
Block on object value
Options: 1
0
This parameter determines the value of the communication object used to block the output.
Enable communication object
"Forced operation" 1 bit
Options: no
yes
yes:
The 1 bit communication object
, page 44, is enabled. The operation of the
output is blocked via the forced operation. The output assumes a defined state. The following
parameters appear:
Forced operation on object value
Options: 1
0
This parameter determines the value of the communication object used to forcibly operate the
output.