Banner Q4X Quick start manual - page 2
Output Indicator
•
On—Output is on
•
Off—Output is off
Active TEACH Indicators (DYN, FGS, and BGS)
•
DYN, FGS, and BGS all off—Two-point TEACH mode
selected (default)
•
DYN on—Dynamic TEACH mode selected
•
FGS on—Foreground suppression TEACH mode
selected
•
BGS on—Background suppression TEACH mode
selected
•
DYN, FGS, and BGS all on—Dual TEACH mode
selected
Stability Indicator (STB)
•
On—Stable signal within the specified sensing range
•
Flashing—Marginal signal, the target is outside the
limits of the specified sensing range, or a multiple
peak condition exists
•
Off—No target detected within the specified sensing
range
Buttons
Use the sensor buttons (SELECT)(TEACH), (+)(CH1/CH2), and (-)(MODE) to program the sensor.
(SELECT)(TEACH)
•
Press to select menu items in Setup mode
•
Press and hold for longer than 2 seconds to start
the currently selected TEACH mode (the default is
two-point TEACH)
(+)(CH1/CH2)
•
Press to navigate the sensor menu in Setup mode
•
Press to change setting values; press and hold to
increase numeric values
•
Press and hold for longer than 2 seconds to switch
between Channel 1 and Channel 2
(-)(MODE)
•
Press to navigate the sensor menu in Setup mode
•
Press to change setting values; press and hold to
decrease numeric values
•
Press and hold for longer than 2 seconds to enter
Setup mode
Note: When navigating the menu, the
menu items loop.
Laser Description and Safety Information
CAUTION: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure. Do not attempt to disassemble this sensor for
repair. A defective unit must be returned to the manufacturer.
Class 1 Lasers
Class 1 lasers are lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical
instruments for intrabeam viewing.
Laser wavelength: 655 nm
Output:
Pulse Duration: 7 µs to 2 ms
Q4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 190073 Rev. E