D-Link DES-3326 User Manual - User Accounts Management
24-port NWay Ethernet Switch User’s Guide
136
Configuring the Switch Using the Console Interface
User Accounts Management
From the Main Menu, highlight Setup User Accounts and
press Enter, then the Setup User Accounts menuappears.
1.
Toggle the Action:< > field to
This will allow the addition of a new user. The other options
are
- this allows for changes to be made to an existing
user entry.
2.
Enter the new user name, assign an initial password, and then
confirm the new password. Determine whether the new user
should have
space bar toggles between the three options.
3.
Highlight APPLY and press enter to make the user addition
effective.
4.
Press Esc. to return to the previous screen or Ctrl+T to go to
the root screen.
5.
A listing of all user accounts and access levels is shown below
the user setup menu. This list is updated when Apply is
executed.
6.
Please remember that Apply makes changes to the switch
configuration for the current session only. All changes
(including User additions or updates) must be entered into
non-volatile ram using the Save Changes command on the
Main Menu
- if you want these changes to be permanent.
Root, User+ and Normal User Privileges
There are three levels of user privileges: Root and User+, and
User
. Some menu selections available to users with Root