D-Link DES-3326 User Manual - Saving Configuration Changes
24-port NWay Ethernet Switch User’s Guide
Web-Based Network Management
263
3.
Move to the Status field, and use the Space bar to
select ENABLED.
4.
Click APPLY to make the changes effective. Use
Save Changes to enter the configuration into NV-
RAM.
Saving Configuration Changes
Clicking the APPLY button makes any configuration change
active, but only for the current session. If the switch is
restarted (rebooted) without entering the configuration changes
into the non-volatile RAM (flash RAM), the configuration
changes will be lost.
To enter configuration changes into the switch’s non-volatile
RAM, select Save Changes from the main screen. Click on the
Save Configuration
button to enter the current configuration
into NV-RAM. The configuration will then be loaded into the
switch’s memory when it is restarted.
Figure 7-7. Save Changes Screen
Starting and Stopping the Web-based Manager
Do the following to use the web-based manager: