D-Link DES-3326 User Manual - Dns Relay
24-port NWay Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
231
The Action:< > field can be toggled between Add and Delete
using the space bar. Toggle to Add and enter the subnet name
for which BOOTP Relay will be active. The subnet’s network IP
address will be displayed in the IP: field. Enter the IP address
of the BOOTP Relay server (or servers, as the case may be),
highlight APPLY and press enter to enter the information into
the BOOTP Relay table. Use Save Changes from the Main
Menu
to enter the information into NV-RAM.
DNS Relay
To enter the IP addresses of DNS Relay servers:
Highlight DNS Relay on the Switch Utilities menu and press
enter
.
Figure 6-77. DNS Relay Setup – Layer 3
The DNS Relay Status
Disabled
and Enabled using the space bar. Toggle the field to