D-Link DES-3326 User Manual - Setting An Ip Address
24-port NWay Ethernet Switch User’s Guide
260
Web-Based Network Management
following at a minimum must be configured or known for the
switch to be managed:
??
IP Address
??
Administrator password
In addition, several other parameters may need to be configured
or known to properly communicate with the switch or allow full
management capability. These include:
??
Default Gateway
??
Trap Destination and Community Name
Configuration of these items may be made from the User
Interface, which is accessible via either the serial console or
Telnet. Refer to the User Guide that came with your system for
more information subsection describe the required configuration.
Setting an IP Address
The IP address for the switch must be set before it can be
managed with the web-based manager. The switch IP address
may be automatically set using BootP protocol, in which case the
actual address assigned to the switch must be known.
The IP address may alternatively be set manually as
follows:
1.
Starting at the Main Menu of the User Interface,
select Configuration / IP Address.
2.
Select IP Address from the menu and enter the
IP address.