D-Link DES-3326 User Manual - Spanning Tree
Manual is about: 24-Port Fast Ethernet Plus 2-Port Gigabit Module Layer 3 Switch
of
425
24-port NWay Ethernet Switch User’s Guide
216
Configuring the Switch Using the Console Interface
Spanning Tree
Switch Spanning Tree Settings
To globally configure STP on the switch:
Highlight Spanning Tree on the main menu and press Enter.
Figure 6-65. Configure Spanning Tree - Global
Note: The Spanning Tree Protocol (STP) operates on two
levels: on the switch level, the settings are globally
implemented. On the port level, the settings are
implemented on a per user-defined Group basis
.
Note: The factory default setting should cover the
majority of installations. However, it is advisable to keep
the default settings as set at the factory; unless, it is
absolutely necessary.