D-Link DES-3326 User Manual - Serial Port Settings
Manual is about: 24-Port Fast Ethernet Plus 2-Port Gigabit Module Layer 3 Switch
of
425
24-port NWay Ethernet Switch User’s Guide
280
Web-Based Network Management
Parameter
Description
Trap Receiving Station
The IP address of the management
station that will receive traps
generated by the switch.
Community String
A string of up to 20 characters
used for authentication of users
wanting to receive traps from the
switch’s SNMP agent.
Status
Specifies whether the current
string is Enabled or Disabled. This
is used to temporarily limit the
receipt of traps generated by the
switch.
Serial Port Settings
The following figure and table describe the configuration of the
switch’s serial port (sometimes referred to as a ‘console port’).
Use Select Protocol to switch between the Console and SLIP
(Serial Line IP) protocols.