D-Link DES-3326 User Manual - Switch Utilities
24-port NWay Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
223
Note: The two (optional) Gigabit ports can only be
grouped together as a link aggregation group. They
cannot be combined with Fast Ethernet ports in a link
aggregation group.
Specify the Group Width:[2]. This is the number of ports, in
sequential order from the base port, that will be included in the
link aggregation group.
The Method:
and Disabled – and is used to turn a link aggregation group on or
off. This is useful for diagnostics, to quickly isolate a bandwidth
intensive network device or to have an absolute backup
aggregation group that is not under automatic control.
Highlight Apply and press enter to make the link aggregation
group configuration active. Use Save Changes from the Main
Menu
to enter the configuration into NV-RAM.
Switch Utilities
Layer 2 Switch Utilities
To access the Switch Utilities menu:
Highlight Utilities from the Main Menu and press enter.