D-Link DES-3326SR Manual - page 104
D-Link DES-3326SR Layer 3 Switch
Figure 14- 19. 802.1X Port Settings – Edit
Configure the following 802.1x port settings:
Parameter
Description
Port
Port being configured for 802.1x settings.
AdminCtlDir
From the pull-down menu, select whether a controlled Port that is
unauthorized will exert control over communication in both receiving and
transmitting directions, or just the receiving direction.
Port Control
From the pull-down menu, select Force Authorized, Force Unauthorized or
Auto
− Force Authorized forces the Authenticator of the port to become
Authorized. Force Unauthorized forces the port to become Unauthorized.
Quiet Period
Select the time interval between authentication failure and the start of a new
authentication attempt.
Tx Period
Select the time to wait for a response from a supplicant (user) to send EAP
Request/Identity packets.
Support Timeout
Select the time to wait for a response from a supplicant (user) for all EAP
packets, except for the Request/Identity packets.
Server Timeout
Select the length of time to wait for a response from a Radius server.
MaxReq
Select the maximum number of times to retry sending packets to the
supplicant.
ReAuthPeriod
Select the time interval between successive re-authentications.
ReAuthenticate
Enable or disable reauthentication.
94