D-Link DES-3326SR Manual - page 120
D-Link DES-3326SR Layer 3 Switch
The packet analysis fields are described here:
Parameter
Description
Update Interval
<Suspend>
The interval (in seconds) that the table is updated. The default is 2 seconds.
Frames
The number of packets (or frames) received or transmitted by the switch with
the size, in octets, given by the column on the right.
Frames/sec
The number of packets (or frames) transmitted or received, per second, by
the switch.
Unicast RX
Displays the number of unicast packets received by the switch in total
number (Frames) and the rate (Frames/sec).
Multicast RX
Displays the number of multicast packets received by the switch in total
number (Frames) and the rate (Frames/sec).
Broadcast RX
Displays the number of broadcast packets received by the switch in total
number (Frames) and the rate (Frames/sec).
RX Bytes
Displays the number of bytes (octets) received by the switch in total number
(Total), and rate (Total/sec).
RX Frames
Displays the number of packets (frames) received by the switch in total
number (Total), and rate (Total/sec).
TX Bytes
Displays the number of bytes (octets) transmitted by the switch in total
number (Total), and rate (Total/sec).
TX Frames
Displays the number of packets (frames) transmitted by the switch in total
number (Total), and rate (Total/sec).
Port Error Packets
The Port Error Packets window displays the packet errors that the switch can detect and displays the results on
a per port basis.
To view the error statistics for a port, open the Network Monitoring folder and the Statistics subdirectory and
click on the Port Packet Analysis link:
Figure 16- 4. Port Error Packet Statistics window
Select the desired port by clicking on the front panel display in the upper part of the web page or use the Unit:
and Port: drop-down menus. The Interval field sets the interval at which the error statistics are updated.
110