D-Link DES-3326SR Manual - page 98
D-Link DES-3326SR Layer 3 Switch
To establish the rule for a previously created CPU Interface Filtering entry:
Open the CPU Interface Filtering table menu and click the Edit Rule button.
Figure 14- 11. CPU Interface Filtering Table – Ethernet
To create a new rule set for an access profile click the New button. A new window is displayed. To remove a
previously created rule, click the corresponding Delete button. The following window is used for the Ethernet
Rule configuration.
Figure 14- 12. CPU Interface Filtering Rule Configuration – Ethernet
Configure the following CPU Interface Filtering Rule - Ethernet settings:
Parameter
Description
Permit/Deny
Select Permitto specify that the packets that match the access profile are
forwarded by the switch according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are
not forwarded by the switch and will be filtered.
Access Rule ID
Adds an additional rule to the above specified access profile. The value is used
to index the rule created.
Source MAC
Enter an MAC address for the source MAC address.
Destination MAC
Destination MAC - Enter a MAC address for the destination MAC address.
88