D-Link DES-3326SR Manual - page 129
D-Link DES-3326SR Layer 3 Switch
PIM Neighbor Address Table
Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should
receive multicast packets.
The PIM Neighbor Address Table contains information regarding each of a router’s PIM neighbors. This
screen may be found in the Monitoring folder under the heading PIM Monitoring and is a read-only screen.
Figure 16- 14. PIM Neighbor Address Table
The following fields are displayed.
Parameter
Description
Interface
The name of the IP interface the router resides on.
Neighbor Address
IP address of the PIM neighbor.
Expire Time
Time in seconds until the PIM neighbor information expires.
GVRP Status
This allows the GVRP status for each of the switch’s ports to be viewed by VLAN. The GVRP status screen
displays the ports on the switch that are currently Egress or Untagged ports. To view GVRP Status, open the
Network Monitoring folder and the Status subdirectory. Click on the GVRP Status link to see the following
menu:
Figure 16- 15. GVRP Status
119