D-Link DES-3326SR Manual - page 57
D-Link DES-3326SR Layer 3 Switch
Serial Port Settings
The Serial Port Settings window allows the configuration of the switch’s serial port.
Click on the Serial Port Settings link from the Basic Setup folder.
Figure 5- 4. Serial Port Settings
The following fields can then be set for the serial port:
Parameter
Description
Baud Rate
Set the serial bit rate used to communicate with a management station. The
console baud rate is 9600 bits per second.
Data Bits
Displays the number of bits that make up a word when communicating with
the management station. The console interface uses 8 data bits.
Stop Bits
Displays the number of bits used to indicate that a word has been completely
transmitted. The console interface uses 1 stop bit.
Auto-Logout
This sets the time the interface can be idle before the switch automatically
logs-out the user. The options are 2 mins, 5 mins, 10 mins, 15 mins, or
Never.
47