D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 24
14
Chapter 2 Installing the CLI
2.3 Starting the CLI
The CLI can be started using either the CLI shortcut installed on your Windows desktop or
the Run command. The following sections describe these methods for starting the CLI.
2.3.1 Using the CLI Shortcut to Start the CLI
When you installed the CLI, a desktop shortcut was automatically placed on your desktop. To
start the CLI using the shortcut, use the following procedure.
1. Double-click the following shortcut on your Windows desktop:
A HOSTNAME IP address prompt similar to the one below appears.
2. Enter the IP address of the management port for the array with which you want to
communicate (for example, 192.168.59.25).
3. Press the Enter key. You are prompted for a username.
4. Enter a username (the default username is admin) and press Enter. You are prompted
for a password.