D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 62
52
Chapter 5 Supported CLI Commands and Properties
5.3 PhysicalPort Commands and Properties
PhysicalPort commands and properties let you perform activities related to an array’s
physical ports, such as returning a port number, port state, or port speed. Table 5-5 lists the
command in the PhysicalPort context and Table 5-6 provides an alphabetical list of the
properties in the PhysicalPort context. Both tables include a description of the command
or property, the global action commands that can be used with the command or property,
and the return parameter (if any). In Table 5-5, for example, RemoveFromLAG is used with
the global action command Do.
Table 5-5. PhysicalPort Command
Command
Description
Associated Global
Action Commands
Return Parameter
Enable
Enables the port
Do
No Return Value
Disable
Disables the port
Do
No Return Value
RemoveFromLAG
Removes the port from its current LAG
Do
No Return Value
Table 5-6. PhysicalPort Properties
Property
Description
Associated Global Action Commands
Return Parameter
IsEnabled
Returns the Is Enabled state
Show
Value
LAG
Returns the LAG
Show/Push/Select
Context
Sets the LAG
Set
Context
Name
Returns the port name
Show
Value
PortNumber
Returns the port number
Show
Value
PortState
Returns the port state
Show
Value
Speed
Returns the port
link
speed
in
bits per second
Show
Value