D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 28
18
Chapter 2 Installing the CLI
You are now at the System level and can issue CLI command lines at the root context, or
navigate to and issue commands from sub-contexts (see section 1.1).
If you omitted the IP address, username, and password in step 2, you will be
prompted for these before gaining access to the root context.
2.4 Exiting the CLI
To exit a CLI session, type the Exit command from the CLI session and press Enter to
terminate the CLI program. The Exitcommand is a “global action” command and can be
issued from any context.
2.5 Removing the CLI
To remove the CLI from the computer on which it is installed, rerun the installer from the
Advanced Features for Windows link. When the screen appears with links for repairing or
uninstalling the CLI, click the un-installation link to remove the CLI.
You can also use Add/Remove Programs from the Windows control panel to
remove the CLI as you would any other Windows application.