D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 60
50
Chapter 5 Supported CLI Commands and Properties
5.2 Controller Commands and Properties
Controller commands and properties let you perform controller-related activities, such as
creating Link Aggregation Groups (LAGs); returning the number of drive slots, serial number,
or name of a controller; and restarting the controller. Table 5-3 provides an alphabetical list
of the commands in the Controller context and
Table 5-4 provides an alphabetical list of the properties in the Controller context. Both
tables include a description of the command or property, the global action commands that
can be used with the command or property, and the return parameter (if any). In Table 5-3,
for example, CreateLAG is used with the global action commands Do, Push, and Select.
Table 5-3. Controller Commands
Command
Description
Associated Global Action Commands
Return Parameter
CreateLAG
Lets you create a LAG
Do/Push/Select
Context
ControllerRestart
Restarts the controller
Do
No Return Value
ControllerShutdown
Shuts down the controller
Do
No Return Value
Table 5-4. Controller Properties
Property
Description
Associated Global Action Commands
Return Parameter
AlternateSoftwareVersion
Returns the software version
in the alternate partition of the
controller
Show
Value
BasePool
Lets you access the system’s
base pool
Show/Push/Select
Context
BatteryState
Returns the battery state
Show
Value
BindFailReason
Returns the results of the
attempted BIND operation
(dual controller systems only)
Show
Value
BladeHealth
Returns the health of the
controller
Show
Value
BladeState
Returns the Bind status of the
controller (Standalone, Bound,
Survivor, etc.)
Show
Value
BladeType
Returns the controller
hardware type (“SFF” for DSN-
5000-series. or “ATX” for DSN-
1000/2000/3000 series
controllers)
Show
Value
BoardType
Returns the hardware type (a
numeric identifier to identify
the product configuration)
Show
Value
BoardTypeRevision
Returns the hardware revision
Show
Value
BufferMemDimmCnt
Returns the number of Buffer
Memory DIMM modules
Show
Value