D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 82
72
Chapter 5 Supported CLI Commands and Properties
5.23 LAG Commands and Properties
LAG commands and properties let you perform LAG-related activities, such as creating,
disabling, and deleting a portal. Table 5-35 provides an alphabetical list of the commands in
the LAG context and Table 5-36 provides an alphabetical list of the properties in the LAG
context. Both tables include a description of the command or property, global action
commands that can be used with the command or property, and the return parameter (if
any). In Table 5-35, for example, CreatePortal
is used with the global action commands
Do, Push, and Select.
Table 5-35. LAG Commands
Command
Description
Associated Global
Action Commands
Return Parameter
CreatePortal
Creates a portal
Do/Push/Select
Context
Delete
Deletes the LAG
Do
No Return Value
Disable
Disables the LAG
Do
No Return Value
Enable
Enables the LAG
Do
No Return Value
ReplaceLAGandChangeVLAN
Changes the VLAN Enabled flag by delete and
recreate
Do
No Return Value
Table 5-36. LAG Properties
Property
Description
Associated Global
Action Commands
Return Parameter
ActiveMTU
Returns the Active Maximum Transmission Unit
Show
Value
Sets the Active Maximum Transmission Unit
Set
Value
AutoSense
Returns the AutoSense value in Boolean notation
Show
Value
Sets the AutoSense value in Boolean notation
Set
Value
FrameType
Returns the Frame Type
Show
Value
IsEnabled
Returns the administrative enabled/disabled state in
Boolean notation
Show
Value
MACAddress
Returns the LAG’s MAC address
Show
Value
Portals
Lets you access the array of portals
Show/Show[ID]/Push[ID]/Select[ID]
ContextList
Ports
Lets you access the array physical ports in the LAG
Show/Show[ID]/Push[ID]/Select[ID]
ContextList
RequestedSpeed
Returns the Requested Speed
Show
Value
Sets the requested speed
Set
Value
VLANState
Returns the VLAN state
Show
Value