D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - Chapter 6
Command Line Interface User’s Guide
77
Chapter 6
Application Examples
This chapter provides examples of entering CLI commands on a command line. In these
examples, bold text indicates commands typed by the user.
The topics covered in this chapter are:
Section 6.1, Setting the Name of the System (page 78)
Section 6.2, Creating Volumes (page 78)
Section 6.3, Obtaining the Maximum Size of a Volume (page 79)
Section 6.4, Obtaining the Maximum Stripe Width of a Volume (page 79)
Section 6.5, Adding an iSCSI Initiator (page 80)
Section 6.6, Obtaining a Vector of All Controllers on a System (page 80)
Section 6.7, Restarting the System (page 81)
Section 6.8, Shutting Down the System (page 81)
Section 6.9, Showing the Status of a Controller (page 81)
Section 6.10, Navigating and Displaying System, Volume, and Drive Information (page 82)