D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 54
44
Chapter 4 Global Action Commands
4.2.14 Show
Use the Show command to show a property in the current context.
Syntax
Show
Examples
Show
Displays the properties in the current context, as shown in the following example.
In the following example, the show command displays the properties of the
iSCSITarget context for the target named “
myvol”.
iSCSITarget[two] ::
show
ID = myvol
Status = OK
DurableName = iqn.2000-03.com.D-Link:myvol:6-001215-0200005d6-484f4348e87aea61
Name = myvol
Secret =
IsChapRequired = false
PrimaryAuthenticationMethod = NO_AUTHENTICATION
SecondaryAuthenticationMethod = CHAP
MaxReceiveDataSegmentLength = 32768
PrimaryHeaderDigestMethod = NO_DIGEST
PrimaryDataDigestMethod = NO_DIGEST
SecondaryHeaderDigestMethod = CRC32C
SecondaryDataDigestMethod = CRC32C
RequestingMarkersOnReceive = false
MaxConnectionsPerSession = 8
InitialR2TPreference = true
ImmediateDataPreference = false
MaxOutstandingR2T = 8
MaxUnsolicitedFirstDataBurstLength = 8192
MaxDataBurstLength = 262144
DataSequenceInOrderPreference = true
DataPDUInOrderPreference = true
DefaultTimeToWaitPreference = 2
DefaultTimeToRetainPreference = 20
ErrorRecoveryLevelPreference = 0
Initiators = 0 Initiators
Sessions = 0 Sessions
Volume = [myvol], State=Normal, Composition=JBOD, Size=10.00GB
Help Show
Displays help for the Show command.