D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 58
48
Chapter 5 Supported CLI Commands and Properties
5.1 System Commands and Properties
System commands and properties let you perform system-related activities, such as
creating volumes, configuring, restarting, or shutting down the array. System commands
are issued at the System context.
Table 5-1 provides an alphabetical list of the commands in the System context and Table
5-2 provides an alphabetical list of the properties in the System context. Both tables
include a description of the command or property, and the global action commands that can
be used with the command or property, and the return parameter. For example, in Table
5-1, AddInitiator can be used with the global action commands Do, Push, and Select,
and the command returns a context.
Table 5-1. System Context Commands
System Context Command
Description
Associated Global Action Commands
Return Parameter
AddInitiator
Adds an iSCSI initiator
Do/Push/Select
Context
CreateVolume
Creates a volume
Do/Push/Select
Context
MaxVolumeSize
Obtains the maximum volume size
Do
Value
MaxVolumeStripeWidth
Obtains the maximum stripe width
supported for a volume type
Do
Value
SystemRestart
Reboots the system
Do
No Return Value
SystemShutdown
Shuts down the system
Do
No Return Value