D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 71
Command Line Interface User’s Guide
61
5.14 iSCSITarget Commands and Properties
iSCSITarget commands and properties let you perform activities related to iSCSI targets
such as setting and returning a CHAP secret, setting and viewing authentication and digest
methods, and viewing durable names. Table 5-22 provides an alphabetical list of the
commands in the iSCSITarget context and Table 5-23 provides an alphabetical list of the
properties in the iSCSITarget context. Both tables include a description of the command
or property, the global action commands that can be used with the command or property,
and the return parameter (if any). In Table 5-22, for example, GrantInitiatorAccess is
used with the global action command Do.
Table 5-22. iSCSITarget Commands
Command
Description
Associated Global Action Commands
Return Parameter
GrantInitiatorAccess
Grants initiator access to this target
Do
No Return Value
RevokeInitiatorAccess
Revokes initiator access to this target
Do
No Return Value
Table 5-23. iSCSITarget Properties
Property
Description
Associated Global
Action Commands
Return
Parameter
DataPDUInOrderPreference
Returns the data PDU in order
preference
Show
Value
Sets the data PDU in order
preference
Set
Value
DataSequenceInOrderPreference
Returns the data sequence In order
preference
Show
Value
Sets the data sequence in order
preference
Set
Value
DefaultTimeToRetainPreference
Returns the default time to retain
preference
Show
Value
Sets the default time to retain
preference
Set
Value
DefaultTimeToWaitPreference
Returns the default time to wait
preference
Show
Value
Sets the default time to wait
preference
Set
Value
DurableName
Returns the durable name
Show
Value
ErrorRecoveryLevelPreference
Returns the error recovery level
preference
Show
Value
Sets the error recovery level
preference
Set
Value
ImmediateDataPreference
Returns immediate data preference
Show
Value
Sets the immediate data preference
Set
Value
InitialR2TPreference
Returns the initial R2T preference
Show
Value