D-Link DSN-5210-10 - xStack Storage Area Network Array Hard Drive Cli User's Manual - page 65
Command Line Interface User’s Guide
55
5.7 VolumeList Property
The VolumeList property lets you access all volumes in a list. Table 5-12 describes the
property in the VolumeList context, the global action commands that can be used with the
property, and the return parameter. In Table 5-12, for example, Volumes is used with the
global action commands Show, Push, and Select.
Table 5-12. Volume Property
Property
Description
Associated Global Action Commands
Return Parameter
Volumes
Lets you access all the volumes in the list
Show/Show[ID]/Push[ID]/Select[ID]
ContextList
5.8 Volume Commands and Properties
Volume commands and properties let you perform volume-related activities, such a
growing, deleting, or scanning a volume for integrity. Table 5-13 provides an alphabetical
list of the commands in the Volume context and Table 5-14 provides an alphabetical list of
the properties in the Volume context. Both tables include a description of the command or
property, the global action commands that can be used with the command or property, and
the return parameter (if any). In Table 5-13, for example, Delete is used with the global
action command Do. For a detailed description of the syntax and parameters of these
commands, refer to the Help command.
Table 5-13. Volume Commands
Command
Description
Associated Global
Action Commands
Return Parameter
Delete
Deletes the volume
Do
No Return Value
GrowTo
Grows the volume to the specified size
Do
No Return Value
IntegrityScan
Now
Scans the volume for integrity (media and possibly parity)
Do
No Return Value
IntegrityScanAt
Scans the volume for integrity (media and possibly parity)
Do
No Return Value
MaxGrowSize
Expands the maximum size to which a volume can grow
Do
Value
Reconfigure
Reconfigures the volume
Do
No Return Value