How to program the Airlab
Airlab from D&R Phone +31 294 418014, email:
info@d-r.nl
Page
53
WHICH CHANNEL IS YOUR DJ CHANNEL
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on the
right what the LCD shows:
This option allows you to set one or more modules in DJ
mode. Not available for Telco Module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED’s located near the SELECT switch will light up on the modules that are set in DJ
mode.
ON WHICH CHANNEL IS YOUR ANNOUNCER MIC
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on the
right what the LCD shows:
This option allows you to set one module in Announcer mode.
Note: you can't select more than one Announcer module.
Not available for Telco Module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are
programming and at the same time you can toggle between the active and not active setting. This is a
very quick way of programming this function. If you have already programmed several modules, the
moment you enter this menu again the LED’s located near the SELECT switch will light up on the
modules that are programmed to be an Announcer module.
ON WHICH CHANNEL IS YOUR STUDIO MIC
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on the
right what the LCD shows:
This option allows you to set one or more modules in Studio
mode. Not available for Telco Module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are
programming and at the same time you can toggle between the active and not active setting. This is a
very quick way of programming this function. If you have already programmed several modules, the
moment you enter this menu again the LED’s located near the SELECT switch will light up on the
modules that are programmed to handle the Studio MIC input.