D&R Airlab User Manual - 15 Windows Software
Windows Software
Airlab from D&R Phone +31 294 418014, email:
info@d-r.nl
Page
64
15 Windows Software
The RS232 communication option enables you to manage the Airlab programming from a remotely
connected PC. The main advantage is that this gives you a much better overview on all the available
settings that can be made. All the custom settings made can be saved in a file. That way you can create
you own presets.
The settings made can be saved to chipcard. Each user can have a personal chipcard with his or hers
customized setting for the Airlab.
15.1 INSTALLATION
The installation software comes on a 3.5" floppy disk. Please run the setup.exe file to begin the installation.
During the setup you can choose the path for the installation directory.
During the installation process a program folder will be created together with a desktop icon. From these
locations you can startup the application.
15.2 GETTING STARTED
Before you run the software be sure to connect the Airlab to the PC correctly. If this isn't
the case you'll see the following error message:
Clicking the OK button continues to startup the Airlab application but without any
software control.
The screen looks like this:
After you have connected the Airlab console correctly you have two options. You can reconnect to the
Airlab using the 'Connection' menu or you can reboot the application.
Figure 19: No
Airlab found
Figure 20: Airlab not connected