D&R Airlab User Manual - On At Power Up?
How to program the Airlab
Airlab from D&R Phone +31 294 418014, email:
info@d-r.nl
Page
56
ON AT START UP
To enter the next programming possibility you simply hit
the DOWN button again and you will see a new item. See
on the right what the LCD shows:
This option allows you to set one or more modules to be
default ON when powering up the console.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED’s located near the SELECT switch will light up on the modules that are turning to their
ON mode when the power comes up.
MIC CONNECTED AT LINE A
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This option allows you to hook up a Mic to Line A on one or
more modules. The COUGH/COMMUNICATION feature
automatically becomes available when the module is in
Line A mode. Not available for Telco Module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting.
This is a very quick way of programming this function. If you have already programmed several modules,
the moment you enter this menu again the LED’s located near the SELECT switch will light up on the
modules that are assigned for MIC-mode in LINE A.
MIC CONNECTED AT LINE B
To enter the next programming possibility you simply hit the
DOWN button again and you will see a new item. See on
the right what the LCD shows:
This option allows you to hook up a Mic to Line B on one or
more modules. The COUGH/COMMUNICATION feature
automatically becomes available when the module is in
Line B mode. Not available for Telco Module.
HOW TO PROGRAM
The SELECT switches in the modules have a dual function. They select the module you are programming
and at the same time you can toggle between the active and not active setting. This is a very quick way of
programming this function. If you have already programmed several modules, the moment you enter this
menu again the LED’s located near the SELECT switch will light up on the modules that are assigned for
MIC-mode in LINE B.