How to program the Airlab
Airlab from D&R Phone +31 294 418014, email:
info@d-r.nl
Page
60
14.3 SYSTEM SETUP
You have now completed the master set-up and it is now time to go to the System settings. To enter this
part of the programming hit the EXIT button to leave the master settings without saving changes or hit the
ENTER switch to leave the master settings with saving changes.
The System menu consists out of 5 submenus, which are:
CONFIGURATION
RECALL
STORE
RECALL
Memory
CARD
(only visible with inserted memory card)
STORE Memory CARD
(only visible with inserted memory card)
Select these sub menus by pushing the UP or DOWN buttons.
CONFIGURATION
The first item in the System menu is the configuration screen.
This screen displays the current configuration of the Airlab.
XX represents the number of Stereo modules available on the
console and YY represent the number of Telco modules
available on the console.
RECALL
In the Recall menu you can recall a stored setup from the
internal Airlab memory.
By pressing the ENTER switch the data will be recalled from
the internal memory. Subsequently pressing the ESC switch,
the Recall menu will be left without recalling.